Engineering · Mid-career
Mechanical Engineer Resume Example
This example suits a mechanical design engineer with four to nine years of experience in product development. It shows how to describe a design from concept to production: the CAD work, the tolerance analysis and simulation behind it, the tests that confirmed it, and what happened to cost and quality once parts came off the tool.
The example resume
Laid out in the Almanac template. The person, employers, schools and figures in this example are invented for illustration. Any resemblance to real people or organisations is unintended.
Kwame Asante
Mechanical Design Engineer | SolidWorks, GD&T, Moulded and Die-Cast Products
- kwame.asante@example.com
- +1 555 0134
- Birmingham, United Kingdom
- linkedin.example.com/in/kwame-asante
Professional summary
Mechanical design engineer with seven years of experience taking injection-moulded and die-cast products from concept to volume production. Works in SolidWorks with GD&T and tolerance analysis, checks designs with FEA and physical testing, and brings toolmakers in early so that parts can be made at the target cost.
Work experience
Mechanical Design Engineer
Ardenfield Garden Tools, Birmingham
Mar 2022 – Present
- Took the gearbox and housing of a cordless hedge trimmer from concept through tooling release to production at 45,000 units a year, designing in SolidWorks
- Ran worst-case and RSS tolerance stack-ups on the blade drive and re-datumed the gearbox cover to the bearing bores, cutting gear-noise rejects at assembly from 4.1% to 0.6%
- Removed 14% of housing mass using ANSYS static and drop-impact FEA, then confirmed the design with 1.5 m drop tests on first-off tool samples
- Held DFM reviews with two injection moulders on draft, wall thickness and gate position, eliminating sink marks and a handle weld line before T1 samples
- Delivered a cost-down of £3.20 per unit (9% of bill-of-materials cost) by merging two brackets into one die-cast part and replacing six screws with snap-fits
Design Engineer
Brindle & Hartwell Castings, Wolverhampton
Jul 2019 – Feb 2022
- Modelled and detailed more than 60 die-cast and machined aluminium housings, issuing drawings with GD&T to BS 8888 for automotive and industrial customers
- Built 3D-printed and CNC-machined prototypes of a coolant pump housing and pressure-tested them, finding a seal leak path that was corrected before the die was cut
- Wrote DFMEAs with quality and tooling engineers for four new product introductions, each approved at first-article inspection without a repeat submission
- Processed 85 engineering change requests through SolidWorks PDM, keeping bills of materials and drawing revisions in step with the foundry and machine shop
Skills
Design: SolidWorks (parts, assemblies, surfacing), SolidWorks PDM, GD&T to BS 8888 and ISO GPS
Analysis: tolerance stack-up (worst case, RSS), ANSYS Mechanical, hand calculations, DFMEA
Manufacture: injection moulding, high-pressure die casting, CNC machining, DFM and DFA
Test: 3D-printed prototypes, drop and vibration testing, endurance rigs, CMM reports
Certifications
Certified SolidWorks Professional (CSWP)
Dassault Systèmes
2021
Education
BEng (Hons) Mechanical Engineering
Coldmere University, West Midlands
2015 – 2019
Final-year project: design and build of a gearbox test rig with strain-gauge torque measurement
Open this example in the resume builder Start empty with this template
Why this resume works
- The headline and summary name SolidWorks, GD&T and two processes, injection moulding and die casting. In two lines a hiring engineer knows he designs parts for volume manufacture and not one-off machines.
- The tolerance bullet names both stack-up methods, the design change that followed (re-datuming the cover to the bearing bores) and the effect on the line: rejects down from 4.1% to 0.6%. Method, decision and result sit in one sentence.
- Simulation is paired with a physical test. Removing 14% of housing mass by FEA is only credible because the next clause says the design passed 1.5 m drop tests on first-off tool samples.
- The cost-down is given per unit and as a share of bill-of-materials cost, with the two design changes that produced it. A reader can see it came from engineering and not from a supplier price negotiation.
- The earlier foundry role supplies the groundwork a product company wants: drawings to a named standard, prototypes built and tested, DFMEAs and change control. Read with the current role, it shows a move from detailing parts to owning a product.
What employers look for in this role
- Design components and assemblies in 3D CAD and release drawings with dimensions, tolerances and material specifications
- Carry out engineering calculations, tolerance analysis and simulation (FEA, sometimes CFD) to check strength, fit and thermal performance
- Build prototypes, plan verification tests and write test reports against the product specification
- Work with suppliers, toolmakers and manufacturing engineers on design for manufacture and assembly
- Manage engineering changes, bills of materials and drawing revisions in a PDM or PLM system
- Run design reviews and risk assessments such as DFMEA
- Reduce product cost and resolve quality problems found in production or in the field
Skills to consider
List only the skills you can back up with an example. These are the ones that come up most for this kind of role.
- CAD and drawings
- SolidWorks, Creo, NX or Inventor, Surface and sheet-metal modelling, GD&T (ASME Y14.5 or ISO GPS), Detail and assembly drawings, PDM and PLM (revision control, BOMs)
- Analysis
- Tolerance stack-up (worst case, RSS), Linear static and modal FEA, Hand calculations for stress, fatigue and fasteners, Thermal analysis or CFD, DFMEA, Material selection
- Manufacturing processes
- Injection moulding, Die casting, CNC machining, Sheet-metal fabrication, Welding and joining, Design for manufacture and assembly, Additive manufacturing for prototypes
- Test and quality
- Design verification planning, Test rig design, Strain gauge and accelerometer measurement, Root cause analysis (8D, 5 Whys), First-article inspection and CMM reports
More bullet points to adapt
Each of these follows the same pattern as the example: an action, what it was applied to, and what changed. Swap in your own facts and figures. The bullet builder assembles the pattern for you.
- Redesigned a welded steel frame as a bolted sheet-metal assembly, cutting fabrication time from 6.5 to 3 hours per unit and removing a stress-relief operation
- Traced field failures of a pump shaft to fretting fatigue at the keyway, changed the fit and fillet radius, and saw warranty returns fall from 2.3% to 0.4%
- Correlated a modal FEA model with accelerometer tap tests to within 6% on the first three natural frequencies, then moved a resonance clear of motor running speed
- Converted 140 legacy 2D drawings to parametric 3D models with a common datum scheme, so that one machining fixture now serves five part variants
- Specified a glass-filled nylon in place of die-cast zinc for a handle bracket after creep testing at 60 °C, saving 38% of part cost
- Wrote the tolerance analysis for a snap-fit battery latch, holding insertion force between 25 N and 40 N across 200 measured samples
Words that recur in adverts
These terms appear often in adverts for this kind of role. Use the ones that are true of you, in sentences that show the skill in use, and check a specific advert with the keyword checker.
Which sections to include
Open with a short summary naming your CAD package, the kind of product you design and the manufacturing processes you know, because a hiring engineer decides from those three facts whether your experience transfers. Experience follows and should fill most of the page: for each role, lead with the product or assembly you owned and how far you took it (concept, tooling release, production). Skills come next, grouped into design, analysis, manufacture and test so that software names are easy to find; the guide to the skills section explains grouping. A CAD certification and your degree sit below. If you hold or are working towards professional registration, add one line under certifications.
Mistakes to avoid
- Listing CAD packages with no parts behind them. Say what you designed, in which material and process, and how far it went: prototype, tooling release or volume production.
- Quoting FEA without validation. "Performed FEA on housing" invites the question of whether the model was right, so state the load case and the test that confirmed it.
- Omitting the manufacturing process and volume. A machined one-off and a moulded part made 45,000 times a year call for different skills, and the reader needs to know which you have.
- Claiming a cost saving with no basis. Give the saving per unit or per year and the design change that produced it, such as a lower part count or a change of material.
- Describing the whole team's result as your own. On a product with several engineers, name the sub-assembly you were responsible for and the decisions that were yours.
Questions and answers
Should I include a portfolio or pictures of my designs?
Keep images off the resume itself, since it needs to work as plain text. If you have work you are free to show, add a portfolio link to the header and bring a drawing or a part to a technical interview. Most production designs belong to your employer, so university and personal projects are the safer choice.
How do I write about products that are confidential or not yet released?
Describe the type of product and the engineering problem without names, dimensions or customers: "a cordless garden tool gearbox" tells a reader enough. Percentages and ratios, such as mass removed or rejects reduced, show the result without disclosing absolute figures. If you signed a confidentiality agreement, check its terms before you write.
Which drawing and tolerancing standard should I name?
Name the one you work to every day, which is usually ASME Y14.5 or the ISO GPS standards (applied in some countries through a national standard such as BS 8888). Adverts normally say which the employer uses. The two systems differ in detail, so claim both only if you could dimension a part correctly in either.
Do I need chartered or professional engineer status for a design role?
Requirements differ between countries and industries. In many product design jobs registration is optional and valued as evidence of competence, while some safety-related or public work calls for a registered engineer. Read the advert and check the position where you intend to work. If you are part-way there, say so plainly, for example "working towards chartered status".