Engineering · Senior

Civil Engineer Resume Example

This example suits a chartered or professionally registered civil engineer with ten or more years of experience, in consultancy or with a contractor. It shows how to present projects by value, physical scope and your role, how to cover both design and construction, and where professional status belongs. The specialism here is drainage, and the same structure serves highways or structures.

The example resume

Laid out in the Colophon template. The person, employers, schools and figures in this example are invented for illustration. Any resemblance to real people or organisations is unintended.

Aroha Ngata

Senior Civil Engineer | Stormwater and Drainage Design | Chartered Engineer

  • aroha.ngata@example.com
  • +1 555 0158
  • Auckland, New Zealand
  • linkedin.example.com/in/aroha-ngata

Professional summary

Chartered civil engineer with 13 years of experience in stormwater and drainage, first with a contractor and then with two design consultancies. Leads drainage design on land development and council infrastructure projects worth up to NZ$42 million, from catchment modelling and consent through to construction monitoring and handover. Manages a team of five.

Work experience

Senior Civil Engineer, Stormwater

Rimu Ridge Consulting Engineers, Auckland

Feb 2019 – Present

  • Led drainage design for a NZ$42 million council stormwater upgrade: 3.1 km of pipeline up to 1,800 mm diameter, two wetlands and a culvert under an arterial road
  • Built and calibrated a 1D/2D InfoWorks ICM model of the 410-hectare catchment, showing the scheme takes 68 properties out of the 1% AEP flood extent
  • Saved the council about NZ$2.6 million at concept stage by replacing 600 m of piped diversion with an open channel and detention basin
  • Acted as engineer's representative through construction, certifying monthly payment claims and closing 37 contractor design queries without delay to the programme
  • Managed five engineers and technicians, signed off their calculations and drawings, and mentored two graduates towards chartered status

Civil Engineer

Hollis & Wray Infrastructure, Hamilton

Mar 2016 – Jan 2019

  • Designed stormwater, wastewater and road drainage for 14 residential subdivisions of 30 to 620 lots in Civil 3D and 12d Model, to council engineering standards
  • Prepared the stormwater management plan and consent drawings for the 620-lot development, with consent granted after one round of council queries
  • Sized detention basins, swales and rain gardens to hold post-development peak flows to pre-development rates for the 2-year and 10-year storms
  • Monitored construction on six sites, witnessing pipe pressure tests and CCTV inspections and compiling as-built records for council acceptance

Site Engineer

Gantry Point Civil, Auckland

Jan 2013 – Feb 2016

  • Set out and supervised drainage and earthworks on a NZ$18 million highway interchange, directing three subcontractor crews and keeping daily quality records
  • Checked trench shoring, pipe bedding and backfill compaction against the specification across 4.2 km of installed pipeline

Professional registration

Chartered engineer (civil)

National engineering institution

2018

Site safety supervisor certificate

Accredited training provider

2024

Skills

Hydrology and hydraulics: InfoWorks ICM, HEC-RAS, InfoDrainage, rational and unit hydrograph methods

Design: Civil 3D, 12d Model, pipe networks, culverts, detention basins, wetlands, water-sensitive design

Delivery: consent applications, specifications, tender evaluation, contract administration, construction monitoring

Leadership: design checking and sign-off, fee estimates, client and council liaison

Education

BE (Hons) Civil Engineering

Kahu Point University, New Zealand

2009 – 2012

Open this example in the resume builder Start empty with this template

Why this resume works

  • Value, physical scope and role arrive together in the first bullet: NZ$42 million, 3.1 km of pipe up to 1,800 mm, two wetlands, and the words "led drainage design". A client or director comparing her with their own project needs nothing more.
  • The modelling bullet states what the model was for. Software, catchment area and calibration are there, but the line ends on the result a council cares about: 68 properties out of the flood extent.
  • One bullet shows judgement about options. Swapping 600 m of pipe for an open channel and basin saved about NZ$2.6 million, which is the kind of decision senior engineers are employed to make.
  • Construction work is described through real duties: certifying payment claims, closing 37 design queries, witnessing pipe tests. With three early years as a site engineer for a contractor, it shows she knows how drawings become trenches.
  • Chartered status appears in the headline, the summary and a registration section with its year, and the team bullet shows the responsibility that goes with it: signing off the calculations and drawings of others.

What employers look for in this role

  • Lead the design of civil works (drainage, roads, earthworks, structures or utilities) to the relevant codes and the client's standards
  • Prepare and check calculations, hydraulic or structural models, drawings, specifications and design reports
  • Obtain planning or regulatory approvals and liaise with councils, utilities and other authorities
  • Estimate quantities and costs, prepare tender documents and evaluate contractor bids
  • Supervise or monitor construction, answer contractor queries and certify work and payments under the contract
  • Manage fees, programme and a team of engineers and technicians
  • Review and approve the work of junior engineers as a chartered or registered professional

Skills to consider

List only the skills you can back up with an example. These are the ones that come up most for this kind of role.

Design and analysis
Stormwater and pipe network design, Hydrological and hydraulic modelling, Road geometry and pavement design, Earthworks and retaining structures, Flood risk assessment, Sustainable drainage (SuDS, water-sensitive design)
Software
Civil 3D, 12d Model, InfoWorks ICM or InfoDrainage, HEC-RAS, GIS (QGIS or ArcGIS), BIM coordination tools
Project delivery
Design codes and local authority standards, Specifications and tender documents, Contract administration (NEC, FIDIC or local forms), Construction supervision and quality records, Cost estimates and bills of quantities, Safety in design
Leadership
Design checking and approval, Fee and programme management, Client and authority liaison, Mentoring graduates

More bullet points to adapt

Each of these follows the same pattern as the example: an action, what it was applied to, and what changed. Swap in your own facts and figures. The bullet builder assembles the pattern for you.

  • Designed a 2.4 m by 1.8 m box culvert replacement under a live arterial road, built in two weekend closures with neither closure overrunning
  • Rebalanced cut and fill levels on a 35-hectare site in 12d Model, removing 28,000 cubic metres of imported fill and about four weeks of haulage
  • Led tender evaluation for a NZ$9 million pipeline contract, scoring five bids on method, programme and price and recommending the award to the client
  • Assessed 22 km of ageing stormwater pipe from CCTV survey data and ranked renewals by condition and flood consequence for a ten-year council programme
  • Settled the final account at 3% above the contract sum after assessing 19 variation claims against the specification and site records
  • Chaired safety-in-design workshops with the contractor and the operator, removing two confined-space entries from the routine maintenance of a pump station

Words that recur in adverts

These terms appear often in adverts for this kind of role. Use the ones that are true of you, in sentences that show the skill in use, and check a specific advert with the keyword checker.

  • Chartered or professional engineer
  • Drainage design
  • Stormwater management
  • Hydraulic modelling
  • Civil 3D
  • Design codes and standards
  • Site supervision
  • Contract administration
  • Tender documents
  • Consents and approvals
  • Safety in design
  • Client liaison
  • Infrastructure
  • Flood risk assessment

Which sections to include

Put your professional status in the headline and summary, since many senior civil roles ask for it and a reader will look for it first. Experience then takes most of the page, arranged by employer but written around projects: give each one its value, its physical scope (length, area, lots, flow) and your role. A professional registration section with the year granted comes next, above skills. In skills, separate modelling and design software from delivery work such as contract administration. Education needs a single line at this stage. If you have many projects, keep three or four per role and offer a fuller project sheet on request.

Mistakes to avoid

  • Giving a project value with no sign of your part in it. "Worked on a $400 million motorway" could mean anything, so state the package you designed or supervised and what that package was worth.
  • Leaving out the construction phase. Clients and contractors want designers who have stood beside a trench, so include site supervision, query responses and payment certification where you have them.
  • Listing modelling software with no design outcome. A hydraulic model is a means to an end: say what it showed, such as properties protected, a pipe size reduced or a consent granted.
  • Hiding professional status near the bottom of the page. If you are chartered or registered, put it at the top with the year; if you are working towards it, say how far along you are.
  • Writing vaguely about "infrastructure projects". Name the discipline (drainage, structures, highways, geotechnics) and the type of client, because civil employers recruit for a discipline and a sector.

Questions and answers

How should I list projects on a civil engineering resume?

Under each employer, choose the three to five projects closest to the role you want. For each, give the value, the scope in physical units, the stage you worked on (feasibility, detailed design, construction) and your role. If the list will not fit, the guide on resume length explains when a second page is reasonable, and a separate project sheet can carry the rest.

Where does chartered or professional engineer status go?

In the headline, in the summary and in a short registration section with the awarding body and year. Titles, routes and what the status permits differ between countries, so use the exact wording of your own registration and check whether it is recognised where you are applying. This example uses a generic description for that reason.

Should I keep site experience on the page if I now work in design?

Yes, in brief. Two bullets about setting out, supervising crews or checking workmanship tell a reader that your designs are buildable, and contractors value it highly in design-and-build teams. Give the project value and what you were responsible for on site, then let the design roles take the space.

Do I name the design codes I have worked to?

Name those the advert mentions if you have used them, and otherwise describe them in general terms, such as national standards and the local authority's engineering code. Codes are specific to a country and sometimes to a single council. If you are moving region, say which you know and show that you have picked up a new set before.