Kwame Asante
Mechanical Design Engineer | SolidWorks, GD&T, Moulded and Die-Cast Products
- kwame.asante@example.com
- +1 555 0134
- Birmingham, United Kingdom
- linkedin.example.com/in/kwame-asante
Professional summary
Mechanical design engineer with seven years of experience taking injection-moulded and die-cast products from concept to volume production. Works in SolidWorks with GD&T and tolerance analysis, checks designs with FEA and physical testing, and brings toolmakers in early so that parts can be made at the target cost.
Work experience
Mechanical Design Engineer
Ardenfield Garden Tools, Birmingham
Mar 2022 – Present
- Took the gearbox and housing of a cordless hedge trimmer from concept through tooling release to production at 45,000 units a year, designing in SolidWorks
- Ran worst-case and RSS tolerance stack-ups on the blade drive and re-datumed the gearbox cover to the bearing bores, cutting gear-noise rejects at assembly from 4.1% to 0.6%
- Removed 14% of housing mass using ANSYS static and drop-impact FEA, then confirmed the design with 1.5 m drop tests on first-off tool samples
- Held DFM reviews with two injection moulders on draft, wall thickness and gate position, eliminating sink marks and a handle weld line before T1 samples
- Delivered a cost-down of £3.20 per unit (9% of bill-of-materials cost) by merging two brackets into one die-cast part and replacing six screws with snap-fits
Design Engineer
Brindle & Hartwell Castings, Wolverhampton
Jul 2019 – Feb 2022
- Modelled and detailed more than 60 die-cast and machined aluminium housings, issuing drawings with GD&T to BS 8888 for automotive and industrial customers
- Built 3D-printed and CNC-machined prototypes of a coolant pump housing and pressure-tested them, finding a seal leak path that was corrected before the die was cut
- Wrote DFMEAs with quality and tooling engineers for four new product introductions, each approved at first-article inspection without a repeat submission
- Processed 85 engineering change requests through SolidWorks PDM, keeping bills of materials and drawing revisions in step with the foundry and machine shop
Skills
Design: SolidWorks (parts, assemblies, surfacing), SolidWorks PDM, GD&T to BS 8888 and ISO GPS
Analysis: tolerance stack-up (worst case, RSS), ANSYS Mechanical, hand calculations, DFMEA
Manufacture: injection moulding, high-pressure die casting, CNC machining, DFM and DFA
Test: 3D-printed prototypes, drop and vibration testing, endurance rigs, CMM reports
Certifications
Certified SolidWorks Professional (CSWP)
Dassault Systèmes
2021
Education
BEng (Hons) Mechanical Engineering
Coldmere University, West Midlands
2015 – 2019
Final-year project: design and build of a gearbox test rig with strain-gauge torque measurement