Resume writing
Resume Fonts, Margins and Layout
Layout has one job: to let a reader find things quickly and read them without effort. This guide gives workable settings for typeface, size, margins, spacing and emphasis, explains the reasoning behind each, and ends with a way to check the page before you send it.
Key points
- Choose one common, plain typeface, or two at most, and set body text between 10 and 12 point.
- Keep margins between about 1.5 and 2.5 cm on every side and never go below roughly 1.3 cm.
- Use bold for the job title or the employer, one size step for headings, and very little else for emphasis.
- Make every repeated element identical: the same date format, bullet style, indent and spacing throughout.
- Set the paper size for the country you are applying in, then check the exported file on screen and in print.
A reader should never notice the design of a resume. They should notice that the name is easy to find, the job titles line up, the dates are where they expect them and the text is comfortable to read. Every setting below serves that.
Start with the defaults in the table and move away from them only when you have a reason.
Settings that work for most resumes
| Element | Sensible range | Notes |
|---|---|---|
| Body text | 10 to 12 pt | Depends on the typeface: some look larger than others at the same size. |
| Your name | 18 to 26 pt | The largest thing on the page, but not a banner. |
| Section headings | 12 to 14 pt, or body size in bold capitals | One clear step above body text. |
| Job title and employer line | Body size, with one of them in bold | Choose which is bold and keep to it. |
| Margins | 1.5 to 2.5 cm (about 0.6 to 1 inch) | Equal left and right; 1.3 cm is a practical minimum. |
| Line spacing | 1.1 to 1.3 times the type size | Tighter and the lines merge; looser wastes space. |
| Space between sections | Roughly one blank line | Clearly more than the space between entries inside a section. |
| Length of a bullet | One or two lines | A three-line bullet usually needs editing, not smaller type. |
Choosing a typeface
Pick a face that is common, plain and designed for reading. Common matters for a practical reason: if you send an editable document and the reader's computer lacks your font, another is substituted and the layout may shift. Widely installed typefaces avoid that, and a PDF avoids it altogether because the fonts travel inside the file (see choosing a resume file format).
- Sans-serif faces such as Arial, Calibri, Helvetica and Verdana look clean and read well on screens. They suit most fields.
- Serif faces such as Georgia, Cambria, Garamond and Times New Roman look traditional and read well in print. They suit law, finance, academia and other formal settings.
- Avoid script, handwriting, novelty and very thin or condensed faces. They slow reading, and some lack the characters needed for names with accents.
One typeface is enough. If you want two, use one for headings and one for body text, and stop there. Differences in size and weight already create a hierarchy; a third face only adds noise.
Check how your choice handles the characters you need. A name such as Zoë, Łukasz or Søren should display correctly, not with a letter borrowed from another font.
Size and line length
Type size is the setting people abuse most, usually to squeeze a long resume onto one page. Body text under 10 point is hard to read on a laptop and harder in print. If the content does not fit at a readable size, the fix is editing, and how long a resume should be explains what to cut first.
Typefaces differ in apparent size. Verdana at 10 point looks roughly as large as Garamond at 12. Judge by eye at full-page view, not by the number in the menu.
Very long lines are tiring, because the eye loses its place on the way back to the left edge. On a full-width single column, margins of about 2 cm keep lines manageable. A summary set across the whole page should run to three or four lines, not six.
Margins and white space
Margins frame the text and give the eye somewhere to rest. Between 1.5 and 2.5 cm on all four sides works for most layouts. Going down to about 1.3 cm is acceptable when you are a line or two over; below that the page looks crammed and a home or office printer may clip the edges.
White space inside the page does as much work as the margins. The principle is proximity: things that belong together sit close, and things that are separate have more space between them. A heading should be nearer to the section it introduces than to the one above it. The gap between two jobs should be bigger than the gap between two bullets.
Emphasis, alignment and colour
- Bold for the thing you want found first in each entry, usually the job title. Use it for the same element every time.
- Italics sparingly, for example for locations or publication titles. Long italic passages are slow to read.
- Capitals for short section headings only. Whole sentences in capitals are hard to read.
- Underlining is best left out: it cuts through letters and looks like a link.
- Alignment: left-align body text. Justified text opens uneven gaps between words in narrow columns, and centred bullets are hard to follow. Dates can sit at the right edge if they line up cleanly.
- Colour: one accent colour for headings or rules is plenty, dark enough to stay legible if the page is printed in black and white. Body text should be black or very dark grey.
Consistency is the real test
Readers forgive a plain design. They notice inconsistency at once, because it looks like carelessness. Decide a pattern for each repeated element and apply it everywhere.
Warehouse Team Leader, Kestrel Yard Distribution, Rotterdam
April 2021 to Present
- Ran a shift of 14 pickers and packers handling 2,300 orders a day
- Cut mis-picks from 1.8% to 0.6% by introducing scan-to-confirm checksWarehouse Operative, Kestrel Yard Distribution, Rotterdam
June 2018 to March 2021
- Picked and packed chilled goods to supermarket delivery schedules
Here the title comes first, the employer and city follow, the dates take their own line in one format, and every bullet starts with the same marker and indent. Whatever pattern you choose, check these in particular:
- Date format: "April 2021", "Apr 2021" or "04/2021", but only one of them.
- The word or mark between dates: "to" or a hyphen, with the same spacing each time.
- Bullet character, indent, and whether bullets end with a full stop.
- Heading style: the same size, weight, case and spacing above and below.
- The order of title, employer and location in every entry.
Columns and page size
A single column is the simplest layout to read and the safest for online application forms, for reasons given in ATS-friendly resumes. A narrow side column for contact details and skills can fit more onto one page and works well when the document goes straight to a person. The resume templates directory can be filtered by single-column and two-column designs, so you can compare both.
Set the paper size for where the employer is. US Letter is the usual size in the United States and Canada; A4 is used in most other countries. A document laid out for one and printed on the other loses part of its margins or gains an awkward gap. The resume builder offers both sizes.
Check the page before you send it
- View the whole page at once, zoomed out until you cannot read the words. The blocks of text should look evenly spaced, with clear gaps between sections and no dense grey slab.
- Zoom in to 100% and read one section. If you find yourself leaning towards the screen, the type is too small.
- Print a copy, in black and white if you used colour. Check that nothing is clipped at the edges and that the accent colour still reads.
- Open the exported file on a phone. A resume is sometimes first opened on one, and a clear single column survives that best.
- Hand it to someone and ask them to find your current job title and your phone number. If either takes more than a moment, adjust the hierarchy.
Common mistakes
- Dropping body text to 9 point or below to save space, which makes the whole page tiring to read.
- Mixing three or more typefaces, or several accent colours, so the page looks busy and no element leads.
- Formatting dates, bullets or headings one way in the first job and another way further down.
- Justifying text in a narrow column, which opens uneven gaps between words.
- Laying the resume out on US Letter and sending it to an employer who prints on A4, or the reverse.
- Using a decorative or uncommon font in an editable file, which may be swapped for a different one on the reader's computer.
Questions and answers
What is the best font for a resume?
There is no single best one. Any common, plain typeface designed for reading will do: Arial, Calibri, Helvetica, Georgia, Cambria and Garamond are all safe. What matters more is that it is set at a readable size and applied consistently.
Is 10 point too small?
It depends on the typeface. Ten point is fine in a face with large, open letters such as Verdana or Calibri, and rather small in Garamond or Times New Roman. Print a page and read it at a normal distance; if it feels like small print, go up half a point.
Can I use colour on a resume?
Yes, in moderation. One dark accent colour for headings, rules or your name adds structure without distracting. Avoid pale colours for text, and check that the page still works when printed in black and white.
Should the resume and cover letter use the same design?
It helps. Using the same typeface, heading style and margins makes the two look like one application and takes no extra effort. They do not need to be identical, only clearly related.