Understanding Torque: Newton-Meters, Pound-Feet and Leverage

Torque is the turning effect of a force. It equals the force multiplied by its perpendicular distance from the pivot, which is why a longer wrench makes a bolt easier to turn.

Force times distance

torque = force × lever arm

Push with 100 newtons on a wrench 0.25 m long and you apply 25 N·m. Double the length to 0.5 m and the same push gives 50 N·m. Only the part of the force at right angles to the lever counts, so pushing along the handle produces no torque at all.

The units

UnitIn N·mWhere it is used
newton-meter (N·m)1SI, vehicle manuals worldwide
pound-foot (lbf·ft)1.3558Engines and wheel nuts (US)
pound-inch (lbf·in)0.11298Small fasteners
kilogram-force meter (kgf·m)9.80665Older manuals
kilogram-force centimeter (kgf·cm)0.0980665Servo motors

Twelve pound-inches make one pound-foot. Mixing them up is a classic way to strip a thread or leave a fastener loose, so check the scale on the wrench against the unit in the specification.

Torque and power

Torque says how hard a shaft twists. Power says how fast it does work. They are linked by rotational speed:

power (kW) = torque (N·m) × rpm ÷ 9549

horsepower = torque (lbf·ft) × rpm ÷ 5252

An electric motor delivering 200 N·m at 3,000 rpm produces 200 × 3,000 ÷ 9,549 = 62.8 kW. The same torque at 6,000 rpm would be twice the power. This is why a gearbox can trade speed for torque without changing power, apart from friction losses.

Typical torque values

  • Bicycle stem bolt: 5 to 6 N·m.
  • Spark plug: 20 to 30 N·m.
  • Car wheel nut: 90 to 140 N·m.
  • Family car engine, peak: 150 to 400 N·m.
  • Heavy truck engine, peak: 2,000 to 3,000 N·m.

These are general ranges. Always use the figure in the manufacturer's documentation for a specific fastener.

Torque is not energy

A newton-meter of torque and a joule of energy have the same dimensions, but they are different things. Energy is transferred only when the torque actually turns something: work equals torque multiplied by the angle turned, in radians.

Frequently asked questions

How do I convert N·m to lbf·ft?

Multiply by 0.73756. For example, 100 N·m is 73.76 lbf·ft.

Is ft-lb the same as lb-ft?

The numbers are identical. Convention uses pound-foot for torque and foot-pound for energy.

What is the difference between pound-feet (lbf·ft) and pound-inches (lbf·in)?

Because 1 foot is 12 inches, 1 lbf·ft = 12 lbf·in (and 1 N·m ≈ 8.8507 lbf·in). Small bicycle stem bolts, electronics enclosures, and engine valve covers are often specified in **pound-inches (in-lbs)**—never set a pound-foot wrench to 80 lbf·ft when a manual calls for 80 lbf·in (6.67 lbf·ft)!

Why do people say 'foot-pounds' for energy and 'pound-feet' for torque?

Writing lbf·ft (pound-force times feet) puts the force unit first to remind engineers it is a rotational torque vector, whereas ft·lbf (foot-pounds) puts distance first for linear mechanical work/energy—mirroring N·m vs J in SI.

What is 1 kgf·m (kilogram-force meter) in newton-meters?

Because 1 kilogram-force is 9.80665 N, 1 kgf·m = 9.80665 N·m (and 1 kgf·cm = 0.0980665 N·m).

Worked example: Tightening an M12 wheel lug nut to 120 N·m with a 45 cm torque wrench

Suppose your car's owner manual specifies a wheel lug-nut tightening torque of 120 N·m, and your torque wrench handle is 45 cm (0.45 m) long from the center of the socket to the center of your hand grip:

  • Step 1 — Convert 120 N·m to pound-feet (lbf·ft, divide by 1.355818): 120 N·m ÷ 1.355818 = 88.51 lbf·ft (or multiply by 12 to get 1,062.1 lbf·in).
  • Step 2 — Perpendicular hand force required on a 0.45 m wrench (F = τ / r): F = 120 N·m ÷ 0.45 m = 266.7 newtons (which is equivalent to lifting a 266.7 ÷ 9.80665 = 27.2 kg / 60.0 lb weight straight at the handle grip).
  • What happens if you use a shorter 25 cm (0.25 m) standard ratchet: You would have to push with 120 ÷ 0.25 = 480 N (48.9 kg / 108 lb of force) to reach the same 120 N·m torque.

Limits and practical bolting caveats

  • Force must be perpendicular (90°) to the wrench arm (τ = r × F × sin θ): If you pull the wrench at a 60° angle instead of 90°, effective torque drops to r × F × sin(60°) = 86.6% of the perpendicular value.
  • Dry vs lubricated threads change bolt clamping tension dramatically: Torque specs in service manuals almost always assume clean, *dry* threads unless explicitly stated otherwise. Putting grease or anti-seize on a bolt rated for dry torque reduces thread friction and can over-stretch or snap the bolt at the exact same N·m reading.