Watts, Kilowatts and Kilowatt-Hours: What Is the Difference?

A kilowatt is 1,000 watts. Both measure power, the rate of using energy. A kilowatt-hour is different: it measures the energy used when one kilowatt runs for one hour.

Watts and kilowatts

A watt is one joule of energy per second. The kilowatt exists only because watts get unwieldy for larger equipment. To convert, move the decimal point three places.

kilowatts = watts ÷ 1000

DeviceTypical power
LED bulb8 to 12 W
Laptop30 to 90 W
Refrigerator (running)100 to 200 W
Microwave oven800 to 1,200 W
Electric kettle1.5 to 3 kW
Home EV charger7 to 11 kW
Family car engine70 to 150 kW

Kilowatt-hours

Energy is power multiplied by time. Run a 1 kW heater for one hour and it uses one kilowatt-hour. Run a 100 W appliance for ten hours and it uses the same amount.

energy (kWh) = power (kW) × time (h)

The kilowatt-hour is what electricity meters count and what bills charge for. One kilowatt-hour is 3.6 megajoules.

Working out a running cost

  1. Find the power in watts on the rating label and divide by 1,000 to get kilowatts.
  2. Multiply by the hours of use to get kilowatt-hours.
  3. Multiply by your price per kilowatt-hour.

A 2,000 W heater used for 5 hours consumes 2 × 5 = 10 kWh. At a price of 0.20 per kWh in your currency, that is 2.00.

Rated power is a maximum. Appliances with thermostats or compressors, such as fridges and heaters, cycle on and off, so their average draw is lower than the label suggests.

Common confusions

  • kW and kWh are not interchangeable. A battery has a capacity in kWh and a maximum output in kW.
  • "kW per hour" is almost always a mistake. Energy use is kWh, not kW/h.
  • kVA is not kW. Generators and transformers are rated in kilovolt-amperes of apparent power. Real power in kW is kVA times the power factor.

Kilowatts and horsepower

Engines are rated in both. One kilowatt is about 1.341 mechanical horsepower, so a 100 kW engine produces about 134 hp.

Frequently asked questions

How many watts are in a kilowatt?

Exactly 1,000 watts.

How long does it take to use 1 kWh?

Divide 1,000 by the wattage. A 100 W device takes 10 hours, and a 2,000 W heater takes 30 minutes.

Why is 'kW per hour' wrong when people mean kilowatt-hours (kWh)?

A kilowatt (kW) is already a rate (1,000 joules per second). Saying 'kilowatts per hour' means a rate of change of power (like a power plant ramping its output up). Energy is power *multiplied* by time: kilowatts × hours = kilowatt-hours (kWh).

How many watt-hours (Wh) are in a 10,000 mAh phone power bank?

Multiply amp-hours (10,000 mAh = 10 Ah) by the internal lithium-ion cell nominal voltage (3.7 V): 10 Ah × 3.7 V = 37 Wh (0.037 kWh—well below the 100 Wh airline carry-on limit).

How many joules are in 1 kilowatt-hour (1 electricity unit)?

Because 1 kW = 1,000 J/s and 1 hour = 3,600 seconds, 1 kWh = 1,000 × 3,600 = **3,600,000 joules (3.6 MJ)**.

Worked example: Monthly electricity bill for a 1.5-ton AC, a LED bulb, and a 2,000 W kettle

Compare how **power (kW)** and **running time (hours)** combine to determine **energy consumed (kWh / electricity bill 'units')** at a tariff of **₹8.00 per kWh** (or **$0.16 per kWh**):

  • Appliance 1 — 2,000 W (2.0 kW) electric kettle used for 6 minutes (0.1 hr) a day:
    • Daily energy: 2.0 kW × 0.1 h = 0.20 kWh per day.
    • 30-day monthly total: 0.20 × 30 = 6.0 kWh → costs only **₹48/month** ($0.96/month), even though its instantaneous power rating (2,000 W) is high!
  • Appliance 2 — 9 W (0.009 kW) LED bulb left on 10 hours a day:
    • Daily energy: 0.009 kW × 10 h = 0.09 kWh per day → 30-day total = 2.7 kWh (**₹21.60/month**).
  • Appliance 3 — Inverter split AC averaging 900 W (0.9 kW) for 8 hours every night:
    • Daily energy: 0.9 kW × 8 h = 7.2 kWh per day → 30-day total = 216.0 kWh (**₹1,728/month** or **$34.56/month**).

Limits and rating-label caveats

  • Nameplate maximum watts vs duty-cycle average watts: A refrigerator's sticker might say 180 W and an iron 1,200 W, but their thermostats cycle the compressor or heating element on and off. Multiply nameplate power by the actual fraction of time the element is actively drawing power (or measure with a plug-in watt-hour meter).
  • Watts (W, real power) vs Volt-Amperes (VA, apparent power) on UPS and inverters: A 1,000 VA computer UPS with a power factor of 0.6 or 0.7 can only supply **600 W to 700 W** of real continuous load (W = VA × PF).