Torque Converter

Convert newton-meters, pound-feet, pound-inches and kilogram-force meters of torque (moment of force).

To 0.737562

1 N·m = 0.737562 lbf·ft

Formula and table for this pair
Show this value in every torque unit
Newton-Meters N·m
1
Pound-Feet lbf·ft
0.737562
Pound-Inches lbf·in
8.85075
Kilogram-Force Meters kgf·m
0.101972
Kilogram-Force Centimeters kgf·cm
10.1972
Kilonewton-Meters kN·m
0.001
Newton-Centimeters N·cm
100
Newton-Millimeters N·mm
1000
Ounce-Inches ozf·in
141.612

The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.

About torque units

Torque, also called moment of force, is the turning effect of a force. It equals the force multiplied by the perpendicular distance from the pivot, so a longer wrench produces more torque from the same push.

Torque has the same dimensions as energy, force times distance, but the two are different quantities, so torque is written in newton-meters and never in joules. In the United States the pound-foot is standard for engines and wheel nuts, and the pound-inch for small fasteners.

Units in this converter

The converter supports 9 units. Each is defined against the newton-meter, so any unit can be converted to any other.

UnitSymbolSystemIn newton-meters
Newton-MetersN·mSIReference unit
Pound-Feetlbf·ftUS customary and imperial1.3558179 N·m
Pound-Incheslbf·inUS customary and imperial0.11298483 N·m
Kilogram-Force Meterskgf·mmetric9.80665 N·m
Kilogram-Force Centimeterskgf·cmmetric0.0980665 N·m
Kilonewton-MeterskN·mSI1000 N·m
Newton-CentimetersN·cmSI0.01 N·m
Newton-MillimetersN·mmSI0.001 N·m
Ounce-Inchesozf·inUS customary and imperial0.0070615518 N·m

Formulas and guides

Frequently asked questions

Is ft-lb the same as lb-ft?

Numerically yes. By convention pound-foot (lb·ft) is used for torque and foot-pound (ft·lb) for energy, but many torque wrenches are labeled ft-lb.

Why isn't torque measured in joules?

Torque and energy share the dimensions of force times distance, but torque is a turning effect, not an amount of work. Writing it as N·m keeps the two apart.

Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.