How to Convert RPM to Angular Velocity (rad/s)

To convert rpm to radians per second, multiply by 2π/60, which is about 0.10472. To go back, multiply rad/s by 9.5493.

Where the factor comes from

One revolution is a full circle, which is 2π radians. One minute is 60 seconds. So one revolution per minute is 2π radians per 60 seconds.

ω (rad/s) = rpm × 2π ÷ 60 = rpm × 0.10472

Worked example

A motor turns at 1,500 rpm. Its angular velocity is 1,500 × 0.10472 = 157.08 rad/s.

rpmrad/sHz (rev/s)
606.2831
10010.471.667
1,000104.7216.67
1,500157.0825
3,000314.1650
3,600376.9960
6,000628.32100

The 3,000 and 3,600 rpm rows are not a coincidence: they are the speeds of a two-pole machine synchronized to 50 Hz and 60 Hz mains.

Why radians per second?

Rotational formulas are written for radians. Once the speed is in rad/s, several useful results follow directly.

  • Rim speed: v = ω × r. A wheel of radius 0.3 m at 157.08 rad/s has a rim speed of 47.1 m/s.
  • Shaft power: P = torque × ω. A torque of 50 N·m at 157.08 rad/s is 7,854 W.
  • Centripetal acceleration: a = ω² × r. At the rim of that wheel, 157.08² × 0.3 = 7,402 m/s², about 755 g.

Angular velocity and frequency

Rotational frequency in hertz counts revolutions per second: divide rpm by 60. Angular velocity is 2π times that. The two describe the same motion, one in whole turns and one in radians. See the guide to frequency for the wider picture.

Degrees per second

Motion control and gyroscopes often use degrees per second. One rpm is exactly 6 degrees per second, since 360° ÷ 60 s = 6.

Frequently asked questions

What is 1 rpm in rad/s?

One rpm is 2π/60 = 0.10472 radians per second.

How do I convert rad/s to rpm?

Multiply by 60 ÷ 2π, about 9.5493. For example, 100 rad/s is 954.93 rpm.

Why is the radian considered a 'dimensionless' unit in SI?

Because an angle in radians is defined as arc length divided by radius (s / r, meters divided by meters), its physical dimension is m / m = 1. That is why multiplying rad/s (s⁻¹) by radius (m) yields meters per second (m/s) with no extra conversion constant.

What is the exact shortcut for converting 60 RPM, 300 RPM, or 600 RPM to rad/s?

Divide the RPM by 30 and multiply by π (ω = (RPM / 30) × π). So 60 RPM = 2π ≈ 6.283 rad/s, 300 RPM = 10π ≈ 31.416 rad/s, and 600 RPM = 20π ≈ 62.832 rad/s.

How do I convert rad/s back to RPM?

Multiply rad/s by 60 / (2π), which is approximately 9.5492966. For example, 100 rad/s × 9.5493 = 954.93 RPM.

Worked example: Finding angular velocity, tip speed, and torque of a 1,800 RPM electric motor

Suppose a 4-pole AC induction motor spins at 1,800 rpm, drives a 200 mm diameter (r = 0.10 m) pulley, and delivers 3.0 kW (3,000 W) of mechanical shaft power:

  • Step 1 — Convert 1,800 rpm to radians per second (ω): ω = 1,800 × (2π ÷ 60) = 30 × 2π = 60π ≈ 188.4956 rad/s (and rotation frequency f = 1,800 ÷ 60 = 30 Hz).
  • Step 2 — Linear belt speed at the pulley rim (v = ω × r): Multiply angular velocity in rad/s by radius in meters: 188.4956 rad/s × 0.10 m = 18.85 m/s (67.86 km/h).
  • Step 3 — Shaft torque from power (τ = P / ω): Divide power in watts by angular velocity in rad/s: 3,000 W ÷ 188.4956 rad/s = 15.92 N·m.

Limits and common unit pitfalls

  • Radius (r) vs diameter (D) in linear speed (v = ωr): Using v = ω × r requires the *radius* (half the diameter) in meters and ω in *radians per second*. If you use diameter (D) and rpm, the equivalent formula is v = π × D × (rpm / 60).
  • Do not plug RPM directly into P = τ × ω or F_c = m × ω² × r: Physics equations for rotational power (P = τω), kinetic energy (E = ½Iω²), and centrifugal force (F = mω²r) only give correct watts, joules, and newtons when ω is in **radians per second**.