Ohm's Law Formula

Relate voltage, current and resistance in an electrical circuit.

The formula

V = I × R

Variables and units

SymbolMeaningUnit
Vvoltage across the componentvolts (V)
Icurrent through itamperes (A)
Rresistanceohms (Ω)

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • I = V ÷ R
  • R = V ÷ I

How it works

For a resistor, the current is proportional to the voltage across it. Rearranged, I = V ÷ R gives the current and R = V ÷ I gives the resistance.

The law describes ordinary resistors and wires well. Diodes, lamps and other components whose resistance changes with voltage or temperature do not follow a single straight line.

Worked example

What resistor limits the current to 20 mA from a 5 V supply through an LED that drops 2 V?

  1. Voltage across the resistor = 5 − 2 = 3 V
  2. I = 20 mA = 0.020 A
  3. R = 3 V ÷ 0.020 A
  4. R = 150 Ω

150 ohms.

Common mistakes

  • Leaving current in milliamperes, which makes the resistance 1,000 times too small.
  • Using the supply voltage where the voltage across the component is needed.

Where it is used

Choosing resistor values, working out cable voltage drop, and fault-finding with a multimeter.

Frequently asked questions

What is the formula for Ohm's law?

V = I × R. Rearranged to find the other quantities: I = V ÷ R; R = V ÷ I.

What do the symbols mean, and which units should I use?

V is voltage across the component (volts (V)); I is current through it (amperes (A)); R is resistance (ohms (Ω)). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Leaving current in milliamperes, which makes the resistance 1,000 times too small. Using the supply voltage where the voltage across the component is needed.

Where is this formula used?

Choosing resistor values, working out cable voltage drop, and fault-finding with a multimeter.

Is there a worked example?

Yes. What resistor limits the current to 20 mA from a 5 V supply through an LED that drops 2 V? 150 ohms.