Resistors in Series and Parallel Formula

Find the combined resistance of resistors connected end to end or side by side.

The formula

Series: R = R₁ + R₂ + … Parallel: 1/R = 1/R₁ + 1/R₂ + …

Variables and units

SymbolMeaningUnit
Rtotal equivalent resistanceohms (Ω)
R₁, R₂individual resistancesohms (Ω)

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • Two in parallel: R = (R₁ × R₂) ÷ (R₁ + R₂)
  • n equal resistors in parallel: R = R₁ ÷ n

How it works

In series the same current passes through each resistor in turn, so the resistances add. In parallel the current divides between the branches, so the conductances (1/R) add, and the total is always lower than the smallest branch.

For two resistors in parallel, a handy shortcut is R = (R₁ × R₂) ÷ (R₁ + R₂).

Worked example

What is the combined resistance of 100 Ω and 150 Ω in parallel?

  1. R = (100 × 150) ÷ (100 + 150)
  2. R = 15,000 ÷ 250
  3. R = 60 Ω

60 ohms. In series the same pair would give 250 ohms.

Common mistakes

  • Adding parallel resistances directly.
  • Forgetting to take the reciprocal at the end of the parallel calculation.

Where it is used

Making a non-standard resistor value, loudspeaker impedance wiring and analyzing voltage dividers.

Frequently asked questions

What is the formula for resistors in series and parallel?

Series: R = R₁ + R₂ + … Parallel: 1/R = 1/R₁ + 1/R₂ + …. Rearranged to find the other quantities: Two in parallel: R = (R₁ × R₂) ÷ (R₁ + R₂); n equal resistors in parallel: R = R₁ ÷ n.

What do the symbols mean, and which units should I use?

R is total equivalent resistance (ohms (Ω)); R₁, R₂ is individual resistances (ohms (Ω)). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Adding parallel resistances directly. Forgetting to take the reciprocal at the end of the parallel calculation.

Where is this formula used?

Making a non-standard resistor value, loudspeaker impedance wiring and analyzing voltage dividers.

Is there a worked example?

Yes. What is the combined resistance of 100 Ω and 150 Ω in parallel? 60 ohms. In series the same pair would give 250 ohms.