Resistance of a Wire Formula

Find the resistance of a conductor from its material, length and cross-section.

The formula

R = ρ × L ÷ A

Variables and units

SymbolMeaningUnit
Rresistanceohms (Ω)
ρresistivity of the materialΩ·m
Llength of the conductorm
Across-sectional aream²

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • L = R × A ÷ ρ
  • A = ρ × L ÷ R

How it works

A longer wire has more resistance and a thicker wire has less. Resistivity is the property of the material that sets the scale: copper is about 1.68 × 10⁻⁸ Ω·m at 20 °C.

With resistivity in Ω·mm²/m (copper is about 0.0168), you can use length in meters and area in mm² directly, which suits cable work.

Worked example

What is the resistance of 50 m of copper wire with a cross-section of 2.5 mm²?

  1. R = 0.0168 Ω·mm²/m × 50 m ÷ 2.5 mm²
  2. R = 0.84 ÷ 2.5
  3. R = 0.336 Ω

About 0.34 ohms one way, or 0.67 ohms for the out-and-back circuit.

Common mistakes

  • Forgetting that a circuit has two conductors, so the current travels twice the cable length.
  • Using diameter where cross-sectional area is needed.

Where it is used

Cable sizing, voltage-drop checks, heating-element design and strain gauges.

Frequently asked questions

What is the formula for resistance of a wire?

R = ρ × L ÷ A. Rearranged to find the other quantities: L = R × A ÷ ρ; A = ρ × L ÷ R.

What do the symbols mean, and which units should I use?

R is resistance (ohms (Ω)); ρ is resistivity of the material (Ω·m); L is length of the conductor (m); A is cross-sectional area (m²). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Forgetting that a circuit has two conductors, so the current travels twice the cable length. Using diameter where cross-sectional area is needed.

Where is this formula used?

Cable sizing, voltage-drop checks, heating-element design and strain gauges.

Is there a worked example?

Yes. What is the resistance of 50 m of copper wire with a cross-section of 2.5 mm²? About 0.34 ohms one way, or 0.67 ohms for the out-and-back circuit.