How Much Concrete Do I Need? Slab Volume, Bags and Ready-Mix

Last updated October 3, 2026 · How we calculate and check results

Ordering concrete is a one-shot job: too little leaves a cold joint, too much wastes money. The volume is simple geometry; the skill is in the allowance and in choosing between bags and a truck.

Open the Concrete Calculator

The volume formula

For a rectangular slab, volume = length × width × thickness, all in the same unit. With length and width in feet and thickness in inches, divide the thickness by 12 to convert it to feet, then divide the cubic feet by 27 to get cubic yards, the unit ready-mix is sold in.

Worked example: a 10 ft × 10 ft patio, 4 inches thick

Volume = 10 × 10 × (4 ÷ 12) = 33.33 cubic feet = 33.33 ÷ 27 = 1.23 cubic yards. Adding 10% extra gives 1.36 cubic yards. In bags: an 80 lb bag yields about 0.6 cubic feet, so 36.7 ÷ 0.6 = 61.1, rounded up to 62 bags. With 60 lb bags (about 0.45 cubic feet each) you would need 82.

Why add extra?

A 5% to 10% allowance covers uneven ground, a slightly thicker pour, spillage and errors in measurement. Forms and subgrade are rarely perfectly level, and a slab that is half an inch thicker than planned uses roughly 12% more concrete. Running short mid-pour is far more expensive than ordering a little extra.

Bags or ready-mix?

Bagged concrete is practical for small jobs: footings, fence posts and small slabs. For larger jobs the effort adds up: one cubic yard needs roughly 45 bags of 80 lb, and each bag weighs 80 lb. A ready-mix truck delivers mixed concrete by the cubic yard, which is usually more practical once you need more than about 1 to 2 yards, but suppliers set minimum loads and may charge a short-load fee for small orders. Compare the cost of bags plus your time and equipment with the delivered price.

Choosing a thickness

  • Patios, walkways and light-use slabs are typically about 4 inches thick.
  • Driveways carrying cars are often 5 to 6 inches.
  • Heavier loads, such as trucks, need thicker slabs and reinforcement as specified by an engineer or local code.
  • The base matters as much as the thickness: compacted gravel, proper drainage and control joints reduce cracking.

Larger and other shapes

A 20 ft × 12 ft driveway at 5 inches is 100.0 cubic feet = 3.70 cubic yards, or about 4.07 yards with 10% extra. For a round footing or column, volume = π × radius² × depth. For irregular shapes, split the area into rectangles and triangles, calculate each volume and add them together.

Common mistakes

  • Entering thickness in feet when the field expects inches.
  • Forgetting the waste allowance.
  • Ignoring the depth of footings or thickened edges.
  • Using the wrong bag yield. Check the bag label, since yields vary by product.

Safety and standards

Wet concrete is caustic and can burn skin; wear gloves, eye protection and boots. Structural slabs, footings and anything related to a building may require permits and must meet local codes, so confirm requirements with your authority or a contractor.

Frequently asked questions

How much does a cubic yard of concrete weigh?

About 4,000 pounds (roughly 1.8 tonnes) for typical concrete, which is why delivery and moving it by hand is heavy work.

How many 80 lb bags make a cubic yard?

Roughly 45, using the yield of about 0.6 cubic feet per bag.

Do I need reinforcement?

It depends on the use and local code. Mesh or rebar helps control cracking and is common for driveways. Follow the guidance for your project.

Keep reading