Linear Thermal Expansion Formula

Find how much a solid lengthens when its temperature rises.

The formula

ΔL = α × L × ΔT

Variables and units

SymbolMeaningUnit
ΔLchange in lengthsame unit as L
αcoefficient of linear expansion1/K or 1/°C
Loriginal lengthany length unit
ΔTtemperature changeK or °C

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • ΔT = ΔL ÷ (α × L)
  • α = ΔL ÷ (L × ΔT)

How it works

Most solids grow by a fixed fraction of their length for each degree of warming. That fraction is the expansion coefficient, typically a few parts per million per kelvin for metals.

The coefficient and the temperature change must use the same degree size. If α is per kelvin, ΔT must be in kelvins or Celsius degrees, not Fahrenheit degrees.

Worked example

A 30 m steel rail (α = 12 × 10⁻⁶ per K) warms from 5 °C to 40 °C. How much longer does it get?

  1. ΔT = 40 − 5 = 35 K
  2. ΔL = 12 × 10⁻⁶ × 30 m × 35
  3. ΔL = 0.0126 m

About 12.6 mm, which is why rails and bridges need expansion gaps.

Common mistakes

  • Using a per-°F coefficient with a temperature change in °C, or the reverse.
  • Using the actual temperatures in place of the difference between them.

Where it is used

Expansion joints in bridges, pipelines and rails, shrink-fitting bearings and tolerancing precision parts.

Frequently asked questions

What is the formula for linear thermal expansion?

ΔL = α × L × ΔT. Rearranged to find the other quantities: ΔT = ΔL ÷ (α × L); α = ΔL ÷ (L × ΔT).

What do the symbols mean, and which units should I use?

ΔL is change in length (same unit as L); α is coefficient of linear expansion (1/K or 1/°C); L is original length (any length unit); ΔT is temperature change (K or °C). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Using a per-°F coefficient with a temperature change in °C, or the reverse. Using the actual temperatures in place of the difference between them.

Where is this formula used?

Expansion joints in bridges, pipelines and rails, shrink-fitting bearings and tolerancing precision parts.

Is there a worked example?

Yes. A 30 m steel rail (α = 12 × 10⁻⁶ per K) warms from 5 °C to 40 °C. How much longer does it get? About 12.6 mm, which is why rails and bridges need expansion gaps.