Heat Conduction Through a Wall Formula

Find the steady rate of heat flow through a flat layer of material (Fourier's law).

The formula

Q = k × A × ΔT ÷ d

Variables and units

SymbolMeaningUnit
Qrate of heat flowwatts (W)
kthermal conductivity of the materialW/(m·K)
Aarea the heat flows throughm²
ΔTtemperature difference across the layerK
dthickness of the layerm

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • d = k × A × ΔT ÷ Q
  • ΔT = Q × d ÷ (k × A)
  • R-value = d ÷ k

How it works

Heat flows faster through a material that conducts well, through a larger area and across a bigger temperature difference. It flows more slowly through a thicker layer.

The ratio d ÷ k is the R-value of the layer, so the formula can also be written Q = A × ΔT ÷ R. That is the form used for building insulation.

Worked example

A 10 m² wall of 0.1 m thick insulation (k = 0.04 W/(m·K)) separates 20 °C inside from 0 °C outside. What is the heat loss?

  1. Q = 0.04 × 10 × 20 ÷ 0.1
  2. Q = 8 ÷ 0.1
  3. Q = 80 W

80 watts, through a layer with an RSI of 2.5 m²·K/W.

Common mistakes

  • Entering thickness in millimeters when conductivity is per meter.
  • Ignoring air films, framing and gaps, which change the real-world figure.

Where it is used

Sizing heating and cooling systems, comparing insulation products and estimating energy savings.

Frequently asked questions

What is the formula for heat conduction through a wall?

Q = k × A × ΔT ÷ d. Rearranged to find the other quantities: d = k × A × ΔT ÷ Q; ΔT = Q × d ÷ (k × A); R-value = d ÷ k.

What do the symbols mean, and which units should I use?

Q is rate of heat flow (watts (W)); k is thermal conductivity of the material (W/(m·K)); A is area the heat flows through (m²); ΔT is temperature difference across the layer (K); d is thickness of the layer (m). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Entering thickness in millimeters when conductivity is per meter. Ignoring air films, framing and gaps, which change the real-world figure.

Where is this formula used?

Sizing heating and cooling systems, comparing insulation products and estimating energy savings.

Is there a worked example?

Yes. A 10 m² wall of 0.1 m thick insulation (k = 0.04 W/(m·K)) separates 20 °C inside from 0 °C outside. What is the heat loss? 80 watts, through a layer with an RSI of 2.5 m²·K/W.