Thermal Conductivity Converter
Convert thermal conductivity between W/(m·K), BTU/(h·ft·°F), BTU·in/(h·ft²·°F) and kcal/(h·m·°C).
1 W/(m·K) = 0.577789 BTU/(h·ft·°F)
Show this value in every thermal conductivity unit
- Watts per Meter-Kelvin W/(m·K)
- 1
- BTU per Hour-Foot-°F BTU/(h·ft·°F)
- 0.577789
- BTU-Inches per Hour-Square Foot-°F BTU·in/(h·ft²·°F)
- 6.93347
- Kilocalories per Hour-Meter-°C kcal/(h·m·°C)
- 0.860421
- Watts per Centimeter-Kelvin W/(cm·K)
- 0.01
- Calories per Second-Centimeter-°C cal/(s·cm·°C)
- 0.00239006
Common thermal conductivity conversions
The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.
- Watts per Meter-Kelvin to BTU per Hour-Foot-°FW/(m·K) to BTU/(h·ft·°F)
- BTU per Hour-Foot-°F to Watts per Meter-KelvinBTU/(h·ft·°F) to W/(m·K)
- Watts per Meter-Kelvin to BTU-Inches per Hour-Square Foot-°FW/(m·K) to BTU·in/(h·ft²·°F)
- BTU-Inches per Hour-Square Foot-°F to Watts per Meter-KelvinBTU·in/(h·ft²·°F) to W/(m·K)
- Watts per Meter-Kelvin to Kilocalories per Hour-Meter-°CW/(m·K) to kcal/(h·m·°C)
- Kilocalories per Hour-Meter-°C to Watts per Meter-Kelvinkcal/(h·m·°C) to W/(m·K)
About thermal conductivity units
Thermal conductivity describes how readily heat flows through a material. Copper, at about 400 W/(m·K), conducts heat around ten thousand times better than mineral wool at about 0.04 W/(m·K). The lower the value, the better the insulator.
American insulation data often uses BTU·in/(h·ft²·°F), which gives the heat flow through a one-inch thickness. It is twelve times the BTU/(h·ft·°F) figure, so be sure which one a table uses.
Units in this converter
The converter supports 6 units. Each is defined against the watt per meter-kelvin, so any unit can be converted to any other.
| Unit | Symbol | System | In watts per meter-kelvin |
|---|---|---|---|
| Watts per Meter-Kelvin | W/(m·K) | SI | Reference unit |
| BTU per Hour-Foot-°F | BTU/(h·ft·°F) | US customary and imperial | 1.7307347 W/(m·K) |
| BTU-Inches per Hour-Square Foot-°F | BTU·in/(h·ft²·°F) | US customary and imperial | 0.14422789 W/(m·K) |
| Kilocalories per Hour-Meter-°C | kcal/(h·m·°C) | metric | 1.1622222 W/(m·K) |
| Watts per Centimeter-Kelvin | W/(cm·K) | metric | 100 W/(m·K) |
| Calories per Second-Centimeter-°C | cal/(s·cm·°C) | CGS | 418.4 W/(m·K) |
Formulas and guides
Frequently asked questions
How does conductivity relate to R-value?
R-value is thickness divided by conductivity. A 0.1 m layer of material with a conductivity of 0.04 W/(m·K) has an RSI of 2.5 m²·K/W. See the R-value converter.
Related converters
Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.