Time calculator
Add or subtract two times in hours and minutes and get the result as h:mm, decimal hours and total minutes.
What the time calculator does
It adds or subtracts two durations written as hours and minutes. Enter 2:45 and 1:30, choose Add, and the result is 4:15. It also shows the answer as 4.25 decimal hours and as 255 minutes.
How time arithmetic works
Time is base 60, not base 10. When minutes reach 60 they roll into an hour, so 2:45 plus 1:30 is 3 hours and 75 minutes, which is 4 hours and 15 minutes. When subtracting, borrow 60 minutes from the hour if needed.
Decimal hours
Timesheets and payroll often use decimal hours. Convert minutes by dividing by 60. Fifteen minutes is 0.25, thirty is 0.5 and forty-five is 0.75. Ten minutes is 0.17 when rounded. Multiply the decimal hours by the hourly rate to get pay.
Typical uses
Total up work shifts, cooking or travel times, study sessions, and video lengths. Subtract the end of a break from the length of a shift. Add up a week of daily durations one pair at a time.
Negative results
If you subtract a larger time from a smaller one, the answer is shown with a minus sign. That is the amount by which the first time is short.
Durations versus clock times
This tool works with lengths of time, not times of day. To find the hours between 9:00 am and 5:30 pm, use the Hours Calculator, which works from a start and end.
Worked example: Adding five flight-log or billable time entries in h:mm
Suppose a pilot or consultant needs to add two multi-hour durations—`14 hours 45 minutes` (`14:45`) and `8 hours 50 minutes` (`8:50`):
- Step 1 — Convert each duration to total minutes: `14:45 = (14 × 60) + 45 = 885 minutes`, and `8:50 = (8 × 60) + 50 = 530 minutes`.
- Step 2 — Add (or subtract) total minutes: `885 + 530 = 1,415 total minutes`.
- Step 3 — Convert back to hours and minutes (base 60): Divide by 60: `floor(1,415 ÷ 60) = 23 whole hours` (`23 × 60 = 1,380` minutes), with a remainder of `1,415 − 1,380 = 35 minutes` → `23:35` (`23 hours 35 minutes`).
- Step 4 — Decimal hours for invoicing: `1,415 ÷ 60 =` 23.5833 decimal hours (at $80/hr, that bills out to `$1,886.67`, whereas mistakenly multiplying `23.35 × $80` would underbill by `$18.67`).
Limits and what this tool cannot do
- Hours and minutes (`h:mm`) format: This calculator adds and subtracts hours and minutes. If you are timing sprint splits or video edits in minutes, seconds, and milliseconds (`mm:ss.ms`), treat the left field as minutes and the right field as seconds (since both use a base-60 rollover!).
- Durations vs time-of-day across time zones: This tool adds elapsed time quantities (`23 hours + 12 hours = 35 hours`). To find what clock time it is in another country or between start/end clock punches, use the Hours Calculator or Time Zone Converter.
Frequently asked questions
How do I add hours and minutes?
Add the minutes and hours separately, then convert every 60 minutes to one hour.
How do I convert minutes to decimal hours?
Divide the minutes by 60. For example, 20 minutes is about 0.33 hours.
Can I add more than two times?
Add two, then use the result as Time A and add the next.
What does a negative result mean?
The second time is longer than the first.
Can I use this calculator to add minutes and seconds (mm:ss) for a music playlist?
Yes! Because there are 60 seconds in a minute just as there are 60 minutes in an hour, entering `3:45` and `4:30` adds up to `8:15` (8 minutes 15 seconds, or 495 total seconds).
How do you borrow 1 hour when subtracting 2:50 from 5:20?
In base-60 subtraction, you cannot subtract 50 minutes from 20 minutes directly, so you borrow 1 hour (60 minutes) from the 5 hours, turning `5:20` into `4 hours 80 minutes`. Then `4:80 − 2:50 = 2 hours 30 minutes` (`2:30`).
What does a negative time result mean?
If you subtract a larger duration (`8:30`) from a smaller budget (`6:00`), the result `-2:30` (`-150 minutes`) shows you exceeded the time budget by 2 hours 30 minutes.