Salary formula

Raise Needed to Recover a Pay Cut

After a pay cut, the raise that brings you back to your old salary is bigger, in percentage terms, than the cut was. This formula gives the exact figure, which is useful when an employer promises to restore pay later or when you negotiate after a reduction.

Formula

raise needed % = cut % ÷ (100 − cut %) × 100

raise needed %
the percentage increase, measured on the reduced salary, that returns pay to its original level
cut %
the original reduction as a percentage of the salary before the cut
100 − cut %
the share of the original salary that is left after the cut

Pay Cut Calculator

What it means

Both percentages describe the same amount of money, but each is measured against a different base. Take a salary of 100 and cut it by 10%: you lose 10 and are left with 90. To get back you need those 10 again, and 10 as a share of 90 is 11.1%, not 10%. The money is identical; the base it is divided by has shrunk.

The formula captures this directly. The top of the fraction, cut %, is the amount lost per 100 of original salary. The bottom, 100 − cut %, is what remains, which is the base for the raise. Because the bottom is always less than 100, the result is always more than the cut, and the gap widens quickly: 5% needs 5.26%, 20% needs 25%, and 50% needs 100%.

The salary itself does not appear in the formula, so the answer is the same at any pay level. An equivalent way to see it uses multipliers: a cut multiplies pay by (1 − cut % ÷ 100), and the recovery must multiply it by the reciprocal of that number. For a 10% cut the two factors are 0.90 and 1 ÷ 0.90 = 1.111.

Read the result as the raise that restores the old number on your payslip. It does not make up for the pay lost while the cut was in force, and it does not allow for prices rising in the meantime.

Other forms

Using multipliers
raise needed % = (1 ÷ (1 − cut % ÷ 100) − 1) × 100
From the two salaries
raise needed % = (original salary − reduced salary) ÷ reduced salary × 100
Cut that a given raise would exactly reverse
cut % = raise % ÷ (100 + raise %) × 100

Worked example

A salary of 72,000 is cut by 15%, and the employer says pay will be "put back" next year.

  1. Salary after the cut: 72,000 × (1 − 15 ÷ 100) = 72,000 × 0.85 = 61,200
  2. Amount to recover: 72,000 − 61,200 = 10,800
  3. Raise needed: 15 ÷ (100 − 15) × 100 = 15 ÷ 85 × 100 = 17.65%
  4. Check from the salaries: 10,800 ÷ 61,200 × 100 = 17.65%
  5. A 15% raise instead would give: 61,200 × 1.15 = 70,380

Result: Restoring the salary to 72,000 takes a raise of about 17.65%; a 15% raise would stop at 70,380, which is 1,620 short.

Where it is used

Your employer cut salaries by 12% during a bad year and now announces a 12% increase "to reverse the reduction". On a salary that was 50,000, the cut took you to 44,000, and 12% of 44,000 is 5,280, giving 49,280. You are still 720 a year below where you started. The formula shows that full restoration needs 12 ÷ 88 × 100, about 13.64%. Having that figure ready lets you ask a precise question: is the intention to restore the old salary, or to raise the reduced one by 12%?

Common mistakes

  • Assuming the cut and the raise are the same percentage because they are the same amount of money.
  • Measuring the recovery raise against the original salary instead of the reduced salary it will actually be applied to.
  • Treating restored pay as full recovery while ignoring the earnings lost during the months the cut applied.
  • Overlooking inflation: returning to the old figure after two years of rising prices is still a fall in what the salary buys.

Questions and answers

Why does a 10% cut need an 11.1% raise?

Because the raise is calculated on a smaller salary. A 10% cut leaves 90 out of every 100. Getting back to 100 means adding 10 to 90, and 10 ÷ 90 is 11.1%. The amount is the same but the base is not.

Does the size of my salary change the answer?

No. The formula contains only the cut percentage, so a 15% cut needs a 17.65% raise whether the salary is 20,000 or 200,000. Only the amount of money involved changes.

What raise do I need to recover the cut and the pay I lost?

More than this formula gives, and the answer depends on how long the cut lasted and over what period you want to be made whole. Add up the pay actually lost, then treat it as a separate one-off amount to raise alongside the restored salary.

Is it the same for a cut in hours?

Yes, as long as the hourly rate is unchanged. Going from 40 hours to 32 is a 20% cut in pay, and returning from 32 to 40 is a 25% increase in both hours and pay.