Angle Converter

Convert degrees, radians, gradians, arcminutes, arcseconds and turns.

To 0.0174533

1 ° = 0.0174533 rad

Formula and table for this pair
Show this value in every angle unit
Radians rad
0.0174533
Degrees °
1
Gradians gon
1.11111
Arcminutes ′
60
Arcseconds ″
3600
Turns tr
0.00277778
Milliradians mrad
17.4533

The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.

About angle units

An angle measures rotation. Degrees divide a full turn into 360 parts, a choice that goes back to Babylonian astronomy and divides evenly by many numbers. Radians measure the same turn as 2π, the length of the arc divided by the radius, which makes them the natural unit for trigonometry, calculus and physics.

Fine angles are split into arcminutes (1/60 of a degree) and arcseconds (1/60 of an arcminute). They are used for map coordinates, telescope resolution and rifle-scope adjustments.

Units in this converter

The converter supports 7 units. Each is defined against the radian, so any unit can be converted to any other.

UnitSymbolSystemIn radians
RadiansradSIReference unit
Degrees°accepted with SI0.017453293 rad
Gradiansgonmetric0.015707963 rad
Arcminutes′accepted with SI0.00029088821 rad
Arcseconds″accepted with SI0.0000048481368 rad
Turnstrother6.2831853 rad
MilliradiansmradSI0.001 rad

Formulas and guides

Worked example: Converting a 36°30'15" surveying bearing to decimal degrees and radians

Suppose a land survey plat lists an interior boundary angle as 36 degrees, 30 arcminutes, 15 arcseconds (`36° 30' 15"`), and your CAD or Python script requires radians:

  • Step 1 — Convert arcminutes and arcseconds to decimal degrees: One arcminute is `1/60` of a degree (`30 / 60 = 0.5°`), and one arcsecond is `1/3,600` of a degree (`15 / 3600 = 0.0041667°`). Total decimal degrees = `36 + 0.5 + 0.0041667 = 36.5041667°`.
  • Step 2 — Convert decimal degrees to radians: Multiply by `π / 180` (`≈ 0.0174532925`): `36.5041667 × (π / 180) = 0.6371179 radians` (or `637.12 milliradians`).
  • Step 3 — Equivalent in gradians (gons): Multiply decimal degrees by `10 / 9`: `36.5041667 × (10 / 9) = 40.56019 grad`.

Limits and what this tool cannot do

  • Planar 2D angles only (not 3D solid angles): This converter handles two-dimensional plane angles (degrees, radians, gradians, arcminutes, arcseconds, turns). It does not convert three-dimensional solid angles measured in steradians (`sr`) or square degrees.
  • True mathematical milliradians vs NATO/artillery mils: In SI mathematics, one full circle is `2π × 1000 ≈ 6,283.185 milliradians (mrad)`. Military compasses use rounded definitions (6,400 NATO mils or 6,000 Warsaw Pact mils per circle); this tool uses the exact SI mathematical definition (`1 mrad = 0.001 rad`).
  • Does not wrap angles modulo 360°: Entering `720°` converts directly to `4π rad` (`2 turns`) rather than wrapping back to `0°`.

Frequently asked questions

How many radians are in a full circle?

A full circle is 2π radians, approximately 6.283185. Half a circle is π radians, and a right angle is π/2.

Why do calculators have a degree and a radian mode?

Trigonometric functions give different results depending on the unit of the input. Sin(90) is 1 in degree mode but about 0.894 in radian mode, so check the mode before calculating.

What is the difference between gradians (gons) and degrees?

A right angle is 90 degrees, or 100 gradians (also called gons in European civil surveying). A full circle is 360 degrees or 400 gradians, so 1 gradian equals exactly 0.9 degrees.

How small is one arcsecond?

One arcsecond is 1/60 of an arcminute, or 1/3,600 of a single degree (about 4.848 microradians)—roughly the angle subtended by a US dime coin viewed from 2.3 miles (3.7 km) away.

Why do JavaScript Math.sin() and Excel SIN() expect radians instead of degrees?

In calculus and physics, power series expansions for sine and cosine (`sin x = x − x³/3! + ...`) only hold true when the angle `x` is measured as the dimensionless ratio of arc length to radius (radians).

Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.