WebM to WAV
Save the sound of a WebM video as an uncompressed WAV.
Audio from your WebM video is decoded to uncompressed 16-bit PCM WAV locally inside your browser tab without server uploads. See our privacy policy.
How to convert WebM to WAV
- Click Choose a WebM video and select your
.webmfile. - Leave Save as set to WAV, and optionally fill in From and To under Part to save if you only need a short clip.
- Press Save audio to download the uncompressed
.wavfile.
WebM videos store audio using the Opus (RFC 6716) or Vorbis codec. While Opus is great for streaming, several older audio editors, sample pads (such as Roland/Akai hardware samplers), game engines, and video NLEs cannot import `.webm` containers directly. Decoding the WebM soundtrack to an uncompressed 16-bit linear PCM `.wav` file gives you raw sample data at 48,000 Hz (the native internal sample rate of Opus) that every audio editor and sampler on earth can read instantly without a second lossy compression pass.
Worked example: Decoding a 90-second WebM voice clip to 48 kHz WAV for Audacity
Suppose you recorded a 90-second browser audio/video clip (`browser_take.webm`, 14.2 MB) containing 48 kHz stereo Opus audio and want to clean it up in Audacity or Reaper:
- Why WAV is better than MP3 before editing: If you converted `browser_take.webm` to MP3, edited it in Audacity, and exported as MP3 again, the audio would suffer three separate lossy encodings (Opus → MP3 → MP3). Exporting to WAV decodes the Opus samples directly to raw 16-bit PCM with zero new compression artifacts.
- Output file math: 90 seconds × 48,000 Hz × 2 channels × 2 bytes/sample + 44-byte RIFF header = 17,280,044 bytes (16.48 MB), generated in about 1.2 seconds.
Limits and what this tool cannot do
- Uncompressed WAV files are much larger than the WebM audio stream: Because Opus inside a WebM uses ~128 kbps (about 0.96 MB per minute) whereas 48 kHz stereo WAV uses 1,536 kbps (10.99 MB per minute), the output WAV audio is roughly 11 times larger than the compressed audio inside the WebM.
- Does not turn lossy Opus into studio lossless: Decoding Opus to PCM WAV prevents *additional* generation loss during editing, but it cannot reconstruct frequencies that Opus discarded when the WebM was originally recorded.
- Video-only WebM files: If the WebM has no Opus or Vorbis audio track, no WAV can be created.
Questions
Why is the output WAV at 48 kHz?
Almost all modern WebM files use the Opus audio codec, which operates natively at a 48,000 Hz sample rate. Writing the WAV at 48,000 Hz preserves the exact decoded samples without unnecessary sample-rate conversion.
Should I choose WebM to WAV or WebM to MP3?
Choose WebM to WAV if you are importing the sound into an audio editor, DAW, video editor, or hardware sampler where you want zero extra lossy compression and zero encoder delay. Choose WebM to MP3 if you just want a small file to listen to on your phone.
Can I extract a 5-second sound bite as a WAV file?
Yes. Enter the start and end times (such as 1:04.2 to 1:09.2) under Part to save, and the exported WAV will contain only those 5 seconds (~960 KB).
Is my WebM file uploaded anywhere?
No. Everything is decoded and saved locally inside your browser tab.
Related converters and guides
- Video to audioSave the sound of any video as MP3, M4A or WAV.
- MP4 to MP3MP3 from an MP4 video.
- WebM to MP3The same sound as MP3.
- Extract audio from a videoWhich audio format to choose.
- WebM to MOVConvert a WebM video to MOV for QuickTime, iMovie and Final Cut.
- WebM to GIFTurn a few seconds of a WebM video or screen recording into a looping GIF.