Scientific Calculator

A free online scientific calculator with trigonometry, logarithms, roots, powers, factorials, pi, degrees and radians modes, and an answer memory.

0

What the scientific calculator does

Beyond the four basic operations, it handles the functions used in school and college maths, science and engineering. It has sine, cosine and tangent and their inverses, natural log (ln) and base-10 log, square and cube roots, powers, the exponential function, factorials, the constant pi, scientific notation with EE and a key that recalls the last answer.

Degrees and radians

Angles can be measured in degrees or radians, and the setting changes the answer. sin(30) is 0.5 in degrees mode, but sin(30) in radians mode is about −0.988. A full circle is 360 degrees, or 2π radians, so one radian is about 57.3 degrees. Check the mode before using trig keys.

Order of operations

The calculator follows the usual order: brackets, then exponents and roots, then multiplication and division, then addition and subtraction. So 2 + 3 × 4 equals 14, not 20. Use brackets to force a different order, such as (2 + 3) × 4 = 20.

Logarithms and exponentials

A logarithm answers the question "what power gives this number?". log(1000) is 3 because 10 to the power 3 is 1000. The natural log, ln, uses the constant e, about 2.71828. The exp key gives e raised to a power, so exp(1) is e.

Factorials and powers

The factorial n! is the product of all whole numbers from 1 to n. 5! is 120. Factorials grow fast and are used in permutations, combinations and probability. For powers, use the square key or a caret, so 2^10 is 1,024.

Scientific notation

Very large or small numbers are written as a number times a power of ten. The EE key enters it, so 3.2 EE 5 means 3.2 × 10^5, which is 320,000.

Tips for avoiding errors

Count your brackets, check degrees or radians, and estimate the answer in your head to catch a slip. Not all exam boards allow online calculators, so check the rules.

Worked example: Solving a physics projectile and decibel expression step by step

Here are two practical engineering calculations showing how degree/radian mode and operator precedence affect the answer:

  • Example 1 — Projectile horizontal range (`R = v² × sin(2θ) / g`): A ball is launched at `v = 25 m/s` at an angle `θ = 30°` (`2θ = 60°`) with `g = 9.81 m/s²`. Confirm the calculator toggle is set to DEG, then enter `25^2 * sin(60) / 9.81`. Because `25² = 625` and `sin(60°) = 0.8660254`, the result is `541.2659 ÷ 9.81 =` 55.175 meters. (If left in RAD mode, `sin(60 rad)` is `-0.3048`, giving a wrong negative number!)
  • Example 2 — Audio voltage gain in decibels (`20 × log10(V_out / V_in)`): Increasing a signal from `0.25 V` to `2.0 V` gives a ratio of `8`. Enter `20 * log(2 / 0.25)` using base-10 `log` (not natural `ln`): `20 × 0.90309 =` +18.06 dB.

Limits and what this tool cannot do

  • 64-bit IEEE 754 floating-point precision (~15–17 significant digits): Very large factorials above `170!` exceed the double-precision maximum (`1.797 × 10^308`) and return `Infinity`, and expressions like `sin(π)` in radians return `1.2246 × 10^-16` instead of exact `0` due to finite binary representation of `π`.
  • No symbolic algebra (CAS) or graphing: This is a numerical scientific evaluator—it computes numeric answers for expressions, but it does not factor polynomials symbolically (`x² − 4`), compute indefinite integrals, or plot 2D function graphs.
  • Factorial (`n!`) requires non-negative integers: Entering a negative number or decimal before `!` is outside standard integer factorial domain.

Frequently asked questions

How do I switch between degrees and radians?

Use the degrees and radians selector on the calculator before using trig functions.

What is the difference between log and ln?

log is base 10 and ln is base e.

What does the factorial key do?

It multiplies all whole numbers from 1 to n.

Why do I get a different answer than my textbook?

Check the angle mode and the order of brackets.

Read the full guide

Last reviewed October 3, 2026 · Report an error

What is the difference between the 'log' button and the 'ln' button?

'log' computes the common base-10 logarithm (`log₁₀(1000) = 3`), used in decibels, pH, and Richter scales. 'ln' computes the natural base-e logarithm (`ln(e) = 1`, where `e ≈ 2.7182818`), used in continuous compounding and calculus.

Why does -3^2 evaluate differently from (-3)^2 in many calculators?

Exponentiation binds tighter than unary negation (`-3^2 = -(3^2) = -9`). To square a negative number so the result is positive `+9`, always wrap the negative number in parentheses: `(-3)^2 = 9`.

How do I enter scientific notation like 6.022 × 10²³?

Use exponent notation (`6.022e23` or `6.022 * 10^23`), and wrap negative exponents in parentheses (`1.602 * 10^(-19)`).

Related calculators