MOV to WAV
Save the sound of a MOV video as an uncompressed WAV for editing.
Audio from your QuickTime MOV video is decoded into uncompressed WAV locally inside your browser tab without server uploads. See our privacy policy.
Audio from your QuickTime MOV video is decoded into uncompressed WAV locally inside your browser tab without server uploads. See our privacy policy.
Audio from your QuickTime MOV video is decoded into uncompressed WAV locally inside your browser tab without server uploads. See our privacy policy.
How to convert MOV to WAV
- Click Choose a MOV video and select your
.movrecording. - Leave Save as on WAV, and optionally enter From and To timestamps to isolate a specific take.
- Click Save audio to download the uncompressed
.wavfile.
Filmmakers, podcasters, and musicians often record video on an iPhone, iPad, or mirrorless camera (which saves .mov files) and then need to bring the dialogue or instrument track into Pro Tools, Logic Pro, Audacity, Ableton Live, or Izotope RX for vocal cleanup, de-essing, or stem alignment. Exporting the MOV soundtrack as an uncompressed 16-bit PCM .wav file ensures your digital audio workstation (DAW) can load the waveform immediately with zero generational compression loss.
Worked example: Mirrorless camera MOV clip to 48 kHz broadcast WAV
Suppose you recorded a 3-minute 30-second acoustic guitar take on a camera or iPhone that saves a QuickTime .mov:
- Input file:
MVI_0412.MOV, 3 minutes 30 seconds (210 seconds), 1080p video + 48,000 Hz stereo audio, 285 MB. - Settings chosen: Save as WAV, full duration (`0:00.0` to `0:00.0`).
- Output file:
MVI_0412.wav, 48,000 Hz × 2 channels × 16 bits (2 bytes) × 210 seconds = 40,320,044 bytes (38.45 MB), decoded in under 2 seconds in your browser.
Limits and what this tool cannot do
- 16-bit integer PCM output: Browser audio decoding writes standard 16-bit little-endian linear PCM WAV files (44.1 kHz or 48 kHz matching the source). If your camera recorded 24-bit or 32-bit float PCM inside a ProRes MOV, it is quantized to 16-bit PCM (96 dB dynamic range).
- Large output files for long videos: Because WAV is uncompressed, a 60-minute stereo MOV produces a ~660 MB WAV file. For long recordings where disk space matters, use MOV to MP3 or M4A instead.
- Timecode (`tmcd`) tracks: QuickTime SMPTE timecode tracks inside professional camera MOV files are not written as Broadcast Wave (`bext`) metadata chunks.
Questions
Why should I use MOV to WAV instead of MOV to MP3 for video or audio editing?
MP3 is a lossy format that discards frequencies and adds a tiny encoder padding delay (typically 576 or 1,152 samples) at the start of the file, which can cause slight lip-sync drift on a video timeline. WAV is uncompressed PCM with zero encoder delay.
Does converting an iPhone MOV to WAV improve its sound quality?
No converter can add detail that wasn't recorded by the microphone, but converting to WAV prevents any new lossy compression artifacts while you edit the audio in your DAW.
Can I extract only a 15-second vocal take from a 10-minute MOV?
Yes. Enter the start and end time (for example 4:12.0 to 4:27.0) under Part to save before clicking Save audio.
Are my camera recordings uploaded anywhere?
No. Everything runs locally in your browser tab.
Related converters and guides
- Video to audioSave the sound of any video as MP3, M4A or WAV.
- MP4 to MP3MP3 from an MP4 video.
- MOV to MP3The same sound as MP3.
- Extract audio from a videoWhich audio format to choose.
- MOV to WebMConvert a MOV video to WebM for web pages and browsers.
- MOV to GIFTurn a few seconds of a MOV video into a looping GIF.