Force-per-area units
These are defined directly as a force on an area. The pascal is a newton per square meter. The psi is a pound-force per square inch. The bar is a round multiple of the pascal, exactly 100,000 Pa, chosen to sit close to atmospheric pressure.
Atmosphere-based units
The standard atmosphere (atm) is defined as exactly 101,325 Pa, representing typical air pressure at sea level. The torr is defined as 1/760 of an atmosphere. The technical atmosphere (at) is one kilogram-force per square centimeter, 98,066.5 Pa, and appears on older European gauges.
Liquid-column units
Early pressure measurements used the height of a liquid in a tube, and the units survive. A millimeter of mercury (mmHg) is the pressure under a 1 mm column of mercury, an inch of mercury (inHg) under a 1-inch column, and an inch of water (inH₂O) under a 1-inch column of water. Because water is 13.6 times less dense than mercury, water-column units suit very low pressures.
Everything in one table
| Unit | In pascals | Typical use |
|---|---|---|
| 1 Pa | 1 | SI base for pressure |
| 1 inH₂O | 249.09 | Ducts, fans, gas appliances |
| 1 mmHg | 133.32 | Blood pressure |
| 1 torr | 133.32 | Vacuum systems |
| 1 hPa (mbar) | 100 | Weather |
| 1 inHg | 3,386.39 | US weather, aviation |
| 1 psi | 6,894.76 | Tires and hydraulics (US) |
| 1 bar | 100,000 | Industry, diving, tires |
| 1 atm | 101,325 | Chemistry reference |
One atmosphere in every unit
A good way to keep the units straight is to remember a single pressure in all of them. Standard atmospheric pressure is:
- 101.325 kPa
- 1.01325 bar, or 1013.25 hPa
- 14.696 psi
- 760 mmHg, or 760 torr
- 29.92 inHg
- 406.8 inches of water
Gauge and absolute pressure
Absolute pressure is measured from a perfect vacuum. Gauge pressure is measured from the surrounding atmosphere, so a flat tire reads zero even though it contains air at one atmosphere. The link is simple:
absolute pressure = gauge pressure + atmospheric pressure
American practice marks the difference with a suffix: psig for gauge and psia for absolute. Unit converters, including the one on this site, do not add or remove the atmosphere. Convert gauge to gauge and absolute to absolute.
Frequently asked questions
How many psi is one bar?
One bar is 14.5038 psi.
Are mmHg and torr the same?
For practical purposes, yes. They differ by less than one part in seven million.
What is the difference between 1 bar and 1 standard atmosphere (atm)?
One bar is defined as exactly 100,000 Pa (100 kPa), whereas one standard atmosphere (1 atm) is defined as 101,325 Pa (101.325 kPa, or 1.01325 bar). They differ by only 1.325%.
Why do weather maps use hectopascals (hPa) instead of kilopascals?
Meteorologists historically used millibars (mbar), where standard sea-level pressure is 1,013.25 mbar. Because 1 hPa = 100 Pa = 1 mbar (0.001 bar), switching from millibars to SI hectopascals kept the exact same numbers on every weather chart and aircraft altimeter.
Why is blood pressure still measured in mmHg?
Clinical sphygmomanometers were standardized around the height of a vertical column of mercury (120/80 mmHg equals 16.0/10.7 kPa). Retaining mmHg worldwide avoids dangerous unit-conversion errors in hospitals.
Related guides
Worked example: Converting a 35 psi car tire pressure across bar, kPa, and absolute pressure
Suppose your car's door-jamb sticker specifies a cold front tire inflation pressure of 35 psig (pounds per square inch gauge):
- From psi to kilopascals (
kPa, multiply by6.894757):35 × 6.894757 = 241.32 kPa(which tire gauges and door stickers round to240 kPaor2.4 bar). - From psi to bar (divide by
14.50377):35 ÷ 14.50377 =2.413 bar. - From gauge pressure (
psig) to absolute pressure (psia) at sea level (+14.696 psi/+101.325 kPa): A tire gauge reads zero when open to the air, so it measures pressure *above* outside atmospheric pressure. The actual absolute gas pressure inside the tire at sea level is35 + 14.7 =49.7 psia (241.3 + 101.3 =342.6 kPa absolute, or3.43 bar(a)).
Limits and practical measurement caveats
- Always check whether an equation needs Gauge (
P_g) or Absolute (P_abs) pressure: The Ideal Gas Law (PV = nRT, used when calculating how much tire pressure drops in freezing winter weather) **must** use absolute pressure (342.6 kPa), never gauge pressure (241.3 kPa). - Liquid-column units (
mmHg,inH2O) depend on fluid temperature: Because mercury and water expand slightly as they warm,1 mmHg(defined at 0 °C,133.322 Pa) differs slightly from a mercury manometer read in a warm 25 °C room unless temperature-corrected.