DPI for photos and scans: what a form means by 200 DPI, and the pixels to use

DPI tells a printer how big to print a picture. An upload form can only check the pixels and the file size, so the useful question is always how many pixels you need.

Updated

DPI is a print instruction

A digital picture is a grid of pixels, for example 600 pixels wide and 800 high. DPI (dots per inch) says how many of those pixels to put into each inch of paper. Print the same 600 × 800 picture at 300 DPI and it comes out 2 × 2.67 inches; print it at 100 DPI and it is three times as large, but softer.

On a screen and in an upload form, nothing is printed. The picture shows its pixels, and the file size depends on the pixels and the compression, not on DPI. That is why a requirement such as “200 DPI” only makes sense together with a printed size, such as 3.5 × 4.5 cm.

From centimetres and DPI to pixels

One inch is 2.54 cm, so:

pixels = centimetres ÷ 2.54 × DPI

For a photo of 3.5 × 4.5 cm at 200 DPI: 3.5 ÷ 2.54 × 200 = 276 pixels wide, and 4.5 ÷ 2.54 × 200 = 354 pixels high. Round to the nearest whole pixel. If the size is given in millimetres, divide by 25.4 instead of 2.54. The centimetres to inches converter does the first step if you prefer.

Common sizes in pixels

Printed sizeDPIPixels (width × height)
Photo 3.5 × 4.5 cm100138 × 177
Photo 3.5 × 4.5 cm200276 × 354
Photo 3.5 × 4.5 cm300413 × 531
Signature 3.5 × 1.5 cm200276 × 118
US photo 2 × 2 in300600 × 600
A4 page 21 × 29.7 cm1501240 × 1754
A4 page 21 × 29.7 cm2001654 × 2339
A4 page 21 × 29.7 cm3002480 × 3508

If the form states pixels directly, use those and ignore any DPI figure: the pixels are what it checks.

When a form gives DPI and KB

Many application forms give three rules at once, for example “3.5 × 4.5 cm, 200 DPI, JPG, 20 to 50 KB”. Do them in this order:

  1. Shape. Crop the photo to the right proportions with passport photo size or crop image. 3.5 × 4.5 cm is the common 35 × 45 mm passport shape.
  2. Pixels. Work out the pixel size with the formula above (276 × 354 in this example) and set it exactly with resize image.
  3. Kilobytes. Bring the resized picture under the limit with compress image to 50 KB, or type another limit in compress image.

A 276 × 354 photo usually fits under 50 KB at good quality. If the form also sets a minimum and the result is below it, the picture has too few pixels to need the space: check that you did not resize it smaller than asked.

Scanning documents

For certificates and other documents, 150 to 200 DPI is enough to read every word, and 300 DPI is what printing services expect. A full A4 page at 300 DPI is about 8.7 million pixels, so a scan at that setting is often several megabytes. If a form limits the document to a few hundred KB, scan at 150 or 200 DPI, or reduce it afterwards: JPG to PDF puts phone photos of the pages into one PDF, and compress PDF in its Strong mode makes scanned PDFs much smaller.

The DPI number stored in a file

A JPG or PNG file can carry a DPI value as a note for printers. Phone cameras often write 72; JPG files saved by browser-based tools, including the image tools on this site, usually carry no DPI value at all. Changing that note does not add or remove a single pixel, so it does not change how sharp the picture is or how many KB it takes.

Upload forms almost always check pixels and file size. If a particular system insists on reading a stored DPI value, a desktop image editor can set it without touching the pixels; in GIMP, for example, it is under Image → Print Size.

Questions

What is the difference between DPI and PPI?

PPI counts the pixels per inch of a picture or screen; DPI counts the ink dots a printer lays down. Forms and most software use DPI for both, and for an upload the meaning is the same: pixels per inch of the printed size.

How many pixels is 200 DPI?

It depends on the printed size. Multiply the size in inches by 200, or divide the size in centimetres by 2.54 and multiply by 200. A 3.5 × 4.5 cm photo at 200 DPI is 276 × 354 pixels.

Does increasing the DPI make a photo sharper?

No. Sharpness comes from the pixels. Changing only the DPI value changes the printed size, not the detail, and adding pixels to a small photo does not add detail either.

Does DPI change the file size in KB?

Not by itself. The KB depend on the number of pixels and the compression. Fewer pixels or stronger compression give a smaller file.

Last reviewed .

Related converters and guides

More guides