Volume of a Cone Formula

Find the volume of a cone, funnel or conical pile from its radius and height.

The formula

V = (1 ÷ 3) × π × r² × h

Variables and units

SymbolMeaningUnit
Vvolumecubic units
rradius of the baseany length unit
hvertical height, not the slant lengthsame length unit

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • h = 3 × V ÷ (π × r²)
  • r = √(3 × V ÷ (π × h))

How it works

A cone holds exactly one third of the cylinder with the same base and height. The same one-third rule applies to pyramids.

For a cone with its tip cut off, such as a bucket or a flat-bottomed hopper, use V = (1 ÷ 3) × π × h × (R² + R × r + r²), where R and r are the radii of the two ends.

Worked example

A conical pile of gravel is 6 m across and 2 m high. How much gravel is there?

  1. r = 3 m
  2. V = 1/3 × 3.14159 × 3² × 2
  3. V = 1/3 × 3.14159 × 18 = 18.85 m³

About 18.9 m³.

Common mistakes

  • Using the slant height along the side in place of the vertical height.

Where it is used

Stockpile volumes, hopper and funnel capacity and tapered tank bottoms.

Frequently asked questions

What is the formula for volume of a cone?

V = (1 ÷ 3) × π × r² × h. Rearranged to find the other quantities: h = 3 × V ÷ (π × r²); r = √(3 × V ÷ (π × h)).

What do the symbols mean, and which units should I use?

V is volume (cubic units); r is radius of the base (any length unit); h is vertical height, not the slant length (same length unit). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Using the slant height along the side in place of the vertical height.

Where is this formula used?

Stockpile volumes, hopper and funnel capacity and tapered tank bottoms.

Is there a worked example?

Yes. A conical pile of gravel is 6 m across and 2 m high. How much gravel is there? About 18.9 m³.