The formula
P = F ÷ A
Variables and units
| Symbol | Meaning | Unit |
|---|---|---|
| P | pressure | pascals (Pa) |
| F | force acting at right angles to the surface | newtons (N) |
| A | area the force acts on | m² |
Other forms of the formula
The same relationship rearranged, so you can solve for whichever quantity is unknown.
- F = P × A
- A = F ÷ P
How it works
Pressure is force per unit area. The same force produces more pressure on a smaller area, which is why a sharp knife cuts and a snowshoe does not sink.
One pascal is one newton per square meter. In US units, pounds-force divided by square inches gives psi.
Worked example
A 70 kg person stands on one heel with a contact area of 1 cm². What pressure does the heel exert?
- F = 70 × 9.80665 = 686.5 N
- A = 1 cm² = 0.0001 m²
- P = 686.5 ÷ 0.0001 = 6,865,000 Pa
About 6.9 MPa, or roughly 1,000 psi.
Common mistakes
- Leaving the area in cm² or mm² while expecting pascals.
- Using mass in kilograms where a force in newtons is needed.
Where it is used
Hydraulic cylinders, tire contact patches, foundation bearing pressure and seal design.
Frequently asked questions
What is the formula for pressure from force and area?
P = F ÷ A. Rearranged to find the other quantities: F = P × A; A = F ÷ P.
What do the symbols mean, and which units should I use?
P is pressure (pascals (Pa)); F is force acting at right angles to the surface (newtons (N)); A is area the force acts on (m²). Use consistent units so the answer comes out in the unit you expect.
What are common mistakes with this formula?
Leaving the area in cm² or mm² while expecting pascals. Using mass in kilograms where a force in newtons is needed.
Where is this formula used?
Hydraulic cylinders, tire contact patches, foundation bearing pressure and seal design.
Is there a worked example?
Yes. A 70 kg person stands on one heel with a contact area of 1 cm². What pressure does the heel exert? About 6.9 MPa, or roughly 1,000 psi.