Flow Rate in a Pipe Formula

Relate volumetric flow rate to the pipe cross-section and the fluid velocity.

The formula

Q = A × v

Variables and units

SymbolMeaningUnit
Qvolumetric flow ratem³/s
Ainternal cross-sectional area of the pipem²
vaverage fluid velocitym/s

Other forms of the formula

The same relationship rearranged, so you can solve for whichever quantity is unknown.

  • v = Q ÷ A
  • A = Q ÷ v
  • A = π × d² ÷ 4 for a round pipe

How it works

The volume passing each second is the area of the pipe multiplied by how fast the fluid moves. For a round pipe, A = π × d² ÷ 4, using the internal diameter.

Because area depends on diameter squared, halving the diameter at the same flow rate makes the fluid move four times faster.

Worked example

Water flows at 2 m/s through a pipe with an internal diameter of 50 mm. What is the flow rate?

  1. A = 3.14159 × 0.05² ÷ 4 = 0.0019635 m²
  2. Q = 0.0019635 m² × 2 m/s
  3. Q = 0.003927 m³/s

About 3.93 L/s, which is 235.6 L/min or 62.2 US gpm.

Common mistakes

  • Using the nominal or outside diameter where the internal diameter is needed.
  • Leaving the diameter in millimeters when the velocity is in meters per second.

Where it is used

Pipe and duct sizing, pump selection and checking that velocities stay within recommended limits.

Frequently asked questions

What is the formula for flow rate in a pipe?

Q = A × v. Rearranged to find the other quantities: v = Q ÷ A; A = Q ÷ v; A = π × d² ÷ 4 for a round pipe.

What do the symbols mean, and which units should I use?

Q is volumetric flow rate (m³/s); A is internal cross-sectional area of the pipe (m²); v is average fluid velocity (m/s). Use consistent units so the answer comes out in the unit you expect.

What are common mistakes with this formula?

Using the nominal or outside diameter where the internal diameter is needed. Leaving the diameter in millimeters when the velocity is in meters per second.

Where is this formula used?

Pipe and duct sizing, pump selection and checking that velocities stay within recommended limits.

Is there a worked example?

Yes. Water flows at 2 m/s through a pipe with an internal diameter of 50 mm. What is the flow rate? About 3.93 L/s, which is 235.6 L/min or 62.2 US gpm.