Kinematic Viscosity Converter

Convert square meters per second, centistokes, stokes and square feet per second.

To 0.000001

1 cSt = 0.000001 m²/s

Formula and table for this pair
Show this value in every kinematic viscosity unit
Square Meters per Second m²/s
0.000001
Centistokes cSt
1
Stokes St
0.01
Square Feet per Second ft²/s
0.0000107639
Square Millimeters per Second mm²/s
1
Square Centimeters per Second cm²/s
0.01
Square Inches per Second in²/s
0.00155

The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.

About kinematic viscosity units

Kinematic viscosity is dynamic viscosity divided by density. It describes how readily a fluid flows under its own weight, which is why lubricating oil grades are defined by it. The practical unit is the centistoke, equal to one square millimeter per second. Water at 20 °C is about 1 cSt.

Units in this converter

The converter supports 7 units. Each is defined against the square meter per second, so any unit can be converted to any other.

UnitSymbolSystemIn square meters per second
Square Meters per Secondm²/sSIReference unit
CentistokescStCGS0.000001 m²/s
StokesStCGS0.0001 m²/s
Square Feet per Secondft²/sUS customary and imperial0.09290304 m²/s
Square Millimeters per Secondmm²/sSI0.000001 m²/s
Square Centimeters per Secondcm²/sCGS0.0001 m²/s
Square Inches per Secondin²/sUS customary and imperial0.00064516 m²/s

Formulas and guides

Frequently asked questions

How do I convert centipoise to centistokes?

Divide the dynamic viscosity in centipoise by the density in g/cm³. An oil of 90 cP and density 0.9 g/cm³ has a kinematic viscosity of 100 cSt.

Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.