Electric Field Strength Converter

Convert volts per meter, kilovolts per millimeter, volts per centimeter and newtons per coulomb.

To 0.000001

1 V/m = 0.000001 kV/mm

Show this value in every electric field strength unit
Volts per Meter V/m
1
Kilovolts per Meter kV/m
0.001
Volts per Centimeter V/cm
0.01
Kilovolts per Centimeter kV/cm
0.00001
Kilovolts per Millimeter kV/mm
0.000001
Volts per Millimeter V/mm
0.001
Newtons per Coulomb N/C
1
Volts per Inch V/in
0.0254

The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.

About electric field strength units

Electric field strength is the force per unit charge at a point, measured in volts per meter or the equivalent newtons per coulomb. Radio signal levels and exposure limits use V/m. Insulation breakdown strength is stated in kV/mm: dry air breaks down at roughly 3 kV/mm.

Units in this converter

The converter supports 8 units. Each is defined against the volt per meter, so any unit can be converted to any other.

UnitSymbolSystemIn volts per meter
Volts per MeterV/mSIReference unit
Kilovolts per MeterkV/mSI1000 V/m
Volts per CentimeterV/cmmetric100 V/m
Kilovolts per CentimeterkV/cmmetric100,000 V/m
Kilovolts per MillimeterkV/mmmetric1,000,000 V/m
Volts per MillimeterV/mmmetric1000 V/m
Newtons per CoulombN/CSI1 V/m
Volts per InchV/inUS customary39.370079 V/m

Formulas and guides

Frequently asked questions

Are V/m and N/C the same unit?

Yes. A volt is a joule per coulomb and a joule is a newton-meter, so one volt per meter equals one newton per coulomb.

Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.