Electrical Conductivity Converter
Convert siemens per meter, millisiemens per centimeter, microsiemens per centimeter and % IACS.
1 µS/cm = 0.001 mS/cm
Show this value in every electrical conductivity unit
- Siemens per Meter S/m
- 0.0001
- Siemens per Centimeter S/cm
- 0.000001
- Millisiemens per Centimeter mS/cm
- 0.001
- Microsiemens per Centimeter µS/cm
- 1
- Megasiemens per Meter MS/m
- 1 × 10⁻¹⁰
- Percent IACS % IACS
- 1.72414 × 10⁻¹⁰
- Millisiemens per Meter mS/m
- 0.1
Common electrical conductivity conversions
The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.
- Siemens per Meter to Siemens per CentimeterS/m to S/cm
- Siemens per Centimeter to Siemens per MeterS/cm to S/m
- Siemens per Meter to Millisiemens per CentimeterS/m to mS/cm
- Millisiemens per Centimeter to Siemens per MetermS/cm to S/m
- Millisiemens per Centimeter to Microsiemens per CentimetermS/cm to µS/cm
- Microsiemens per Centimeter to Millisiemens per CentimeterµS/cm to mS/cm
- Megasiemens per Meter to Percent IACSMS/m to % IACS
- Percent IACS to Megasiemens per Meter% IACS to MS/m
About electrical conductivity units
Conductivity is the reciprocal of resistivity and measures how well a material carries current. Water testing uses microsiemens per centimeter: pure water is below 1 µS/cm, tap water is typically 50 to 800, and seawater is around 50,000.
Metals are compared with the International Annealed Copper Standard, where 100% IACS is defined as 58 MS/m.
Units in this converter
The converter supports 7 units. Each is defined against the siemens per meter, so any unit can be converted to any other.
| Unit | Symbol | System | In siemens per meter |
|---|---|---|---|
| Siemens per Meter | S/m | SI | Reference unit |
| Siemens per Centimeter | S/cm | CGS | 100 S/m |
| Millisiemens per Centimeter | mS/cm | metric | 0.1 S/m |
| Microsiemens per Centimeter | µS/cm | metric | 0.0001 S/m |
| Megasiemens per Meter | MS/m | SI | 1,000,000 S/m |
| Percent IACS | % IACS | reference | 580,000 S/m |
| Millisiemens per Meter | mS/m | SI | 0.001 S/m |
Formulas and guides
Frequently asked questions
How do I convert µS/cm to mS/cm?
Divide by 1,000. A reading of 1,400 µS/cm is 1.4 mS/cm.
Can conductivity be converted to TDS?
Only approximately. Total dissolved solids in mg/L is commonly estimated as conductivity in µS/cm times a factor between 0.5 and 0.7, depending on which salts are present.
Related converters
Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.