Electrical Conductivity Converter

Convert siemens per meter, millisiemens per centimeter, microsiemens per centimeter and % IACS.

To 0.001

1 µS/cm = 0.001 mS/cm

Formula and table for this pair
Show this value in every electrical conductivity unit
Siemens per Meter S/m
0.0001
Siemens per Centimeter S/cm
0.000001
Millisiemens per Centimeter mS/cm
0.001
Microsiemens per Centimeter µS/cm
1
Megasiemens per Meter MS/m
1 × 10⁻¹⁰
Percent IACS % IACS
1.72414 × 10⁻¹⁰
Millisiemens per Meter mS/m
0.1

The most-used pairs have their own page with the formula, worked examples and a reference table. The others open this converter set to that pair.

About electrical conductivity units

Conductivity is the reciprocal of resistivity and measures how well a material carries current. Water testing uses microsiemens per centimeter: pure water is below 1 µS/cm, tap water is typically 50 to 800, and seawater is around 50,000.

Metals are compared with the International Annealed Copper Standard, where 100% IACS is defined as 58 MS/m.

Units in this converter

The converter supports 7 units. Each is defined against the siemens per meter, so any unit can be converted to any other.

UnitSymbolSystemIn siemens per meter
Siemens per MeterS/mSIReference unit
Siemens per CentimeterS/cmCGS100 S/m
Millisiemens per CentimetermS/cmmetric0.1 S/m
Microsiemens per CentimeterµS/cmmetric0.0001 S/m
Megasiemens per MeterMS/mSI1,000,000 S/m
Percent IACS% IACSreference580,000 S/m
Millisiemens per MetermS/mSI0.001 S/m

Formulas and guides

Frequently asked questions

How do I convert µS/cm to mS/cm?

Divide by 1,000. A reading of 1,400 µS/cm is 1.4 mS/cm.

Can conductivity be converted to TDS?

Only approximately. Total dissolved solids in mg/L is commonly estimated as conductivity in µS/cm times a factor between 0.5 and 0.7, depending on which salts are present.

Think a conversion is incorrect? Email contact@sjwebtechwork.com with the page address, the value you entered, the result you saw and the result you expected.