AAC to MP3

Convert AAC to MP3 for players and apps that only take MP3.

Decoding AAC frames and encoding LAME MP3 audio happens locally in your browser tab. Your audio files are never uploaded; read the privacy policy for details.

How to convert AAC to MP3

  1. Click Choose an AAC file and select a raw .aac (ADTS) stream or an AAC-encoded .m4a recording.
  2. Pick your target MP3 quality (192 kbps for music and stereo mixes, 128 kbps for general listening, or 64 kbps mono for voice notes) and optional start/end trim timestamps.
  3. Press Convert to MP3 and save the finished .mp3 file to your device.

Advanced Audio Coding (AAC) is the default audio codec for Apple devices, YouTube streams, and Digital Radio Mondiale broadcasts. Standalone .aac files usually wrap each compressed frame in an Audio Data Transport Stream (ADTS) header rather than an MP4 container. While phones and browsers play ADTS AAC files easily, many older car stereos, DJ CDJ decks, hardware voice recorders, and cheap MP3 players only recognise MPEG-1/2 Audio Layer III (.mp3) files formatted on a FAT32 USB drive.

Worked example: Broadcast AAC recording to 192 kbps MP3

Consider a stereo radio capture named interview_stream.aac saved as an ADTS stream:

  • Input file: 18 minutes 20 seconds (1,100 seconds), 44.1 kHz stereo AAC-LC at 128 kbps, file size 17.60 MB (18,454,937 bytes).
  • Settings chosen: MP3 quality set to 192 kbps, trim range set from 0:15.0 to 18:05.0 (1,070 seconds) to remove dead air at the start and end.

The browser strips the 7-byte ADTS header from each AAC frame, decodes the audio to 16-bit PCM in memory, slices the PCM buffer to the 1,070-second window, and encodes constant-rate MP3 frames at 192 kbps. At 192,000 bits per second (24,000 bytes/s), the 1,070-second output comes to 25,680,000 bytes (24.49 MB) and completes in roughly 9 seconds on a desktop CPU.

Limits and what this tool cannot do

  • Lossy-to-lossy generation loss: Both AAC and MP3 discard frequencies using psychoacoustic masking models. Converting a 128 kbps AAC file to a 320 kbps MP3 will not restore high frequencies that were already removed when the AAC file was created; it only prevents further noticeable degradation.
  • No multichannel 5.1 MP3 output: The MP3 standard used by consumer players supports only mono (1 channel) and stereo (2 channels). If your input AAC stream contains 5.1 surround sound (6 channels), it is downmixed to stereo during conversion.
  • xHE-AAC (Extended HE-AAC) support depends on your browser: Standard AAC-LC, HE-AAC v1 (SBR), and HE-AAC v2 (PS) decode in all current desktop and mobile browsers, but low-bitrate xHE-AAC streams require native OS decoder support.
  • No ID3 artwork copying from raw ADTS: Raw .aac ADTS files rarely carry standard metadata containers, so album cover images must be added afterwards in a tag editor if needed.

Questions

Which MP3 bitrate should I pick when converting from 128 kbps AAC?

Choose 192 kbps MP3. Because AAC is more efficient than MP3 at the same bitrate, encoding the MP3 one step higher (192 kbps instead of 128 kbps) minimises additional quantization noise from the second lossy pass.

What is the difference between a .aac file and a .m4a file?

Both usually hold AAC audio data, but a .aac file places a tiny 7-byte ADTS header before every audio frame so players can join a live stream mid-broadcast, whereas a .m4a file wraps the AAC frames inside an MPEG-4 container with an index table and metadata tags.

Why won't my car USB port see the original .aac file?

Many factory head units scan USB flash drives exclusively for filenames ending in .mp3 or .wma and only include an hardware MP3 decoder chip. Converting the track to a 44.1 kHz stereo MP3 makes it appear in the car's folder list.

Can I trim an AAC file without converting it to MP3?

This page always outputs an MP3 file. If you want to keep AAC audio inside an M4A container without re-encoding, use the Audio Converter and select M4A stream copy.

Last reviewed .

Related converters and guides