3GP to MP4
Convert 3GP videos from older phones to MP4 that plays on any device.
3GP clips from feature phones and early Android handsets are processed directly inside your browser tab. No video frames or audio tracks leave your device; see the privacy policy for local storage details.
How to convert 3GP to MP4
- Select Choose a video and pick your
.3gpor.3g2clip. - Pick Convert to H.264 if the file came from an older handset using H.263 or AMR-NB audio, or choose Keep the original video if the file already stores H.264 video and AAC audio.
- Click Convert to MP4 and save the resulting
.mp4file once the progress bar finishes.
The 3GPP container (.3gp) was designed for 2G and 3G mobile networks where bandwidth and flash storage were scarce. Most clips recorded between 2003 and 2012 use QCIF (176 × 144) or CIF (352 × 288) resolution at 12 to 15 frames per second, paired with Adaptive Multi-Rate Narrowband (AMR-NB) mono speech sampled at 8,000 Hz. Modern desktop players, iPhones, and web browsers often reject AMR audio inside an ISO base media container unless it is transcoded into AAC-LC.
Worked example: Nokia 6300 clip to playable MP4
Suppose you have an archive clip named VID_20090418.3gp recorded on a classic handset with these stream properties:
- Input container and size: 3GPP Release 5, 42 seconds long, 1.18 MB (1,237,320 bytes).
- Input video stream: H.263 Profile 0 at 176 × 144 pixels, 14.98 fps, 198 kbps bit rate.
- Input audio stream: AMR-NB mono, 8 kHz sample rate, 12.2 kbps bit rate.
When you choose Convert to H.264, the browser decodes the H.263 macroblocks and AMR speech frames in memory and encodes an H.264 High/Main stream at the native 176 × 144 resolution alongside a 44.1 kHz AAC-LC audio track at 96 kbps. On a midrange laptop, the 42-second clip finishes in about 3.5 seconds and produces a 2.04 MB VID_20090418.mp4 file that opens natively in QuickTime, Windows Media Player, iOS Photos, and WhatsApp without missing-codec errors.
Limits and what this tool cannot do
- No resolution upscaling or deblocking: Converting a 176 × 144 or 320 × 240 3GP video to MP4 changes the codec and container so modern devices can play it, but it does not invent detail that the original phone sensor never captured.
- Stream copy fails on AMR audio: Choosing Keep the original video only works when the 3GP file already contains H.264 or MPEG-4 Part 2 video with AAC audio (common on circa-2011 Android 2.3 phones). If the audio track is AMR-NB or AMR-WB, MP4 multiplexers will reject the audio stream unless you select Convert to H.264.
- Proprietary carrier DRM: Ringback videos or carrier-locked
.3gpdownloads wrapped in OMA DRM v1/v2 encryption cannot be read or converted. - Browser memory ceiling: Because transcoding runs in WebAssembly memory inside your tab, single files above 1.5 GB on desktop or 400 MB on mobile phones may stop with an out-of-memory error.
Questions
Why does my converted MP4 still look blocky on a modern screen?
Early 3GP cameras recorded at 176 × 144 or 352 × 288 pixels with heavy H.263 compression. Stretching a 176 × 144 picture across a 1080p phone screen magnifies each original pixel blockmore than ten times. The converter preserves every pixel from the source without adding extra blur.
Can this converter open .3g2 files from old CDMA phones?
Yes. 3GPP2 (.3g2) files recorded on older Verizon or Sprint CDMA handsets use the same ISO base media layout and are accepted by the file picker. Select Convert to H.264 so QCELP or EVRC audio is transcoded into standard AAC.
Why is the output MP4 slightly larger than the original 3GP file?
AMR-NB audio uses only 12.2 kbps and H.263 uses very low bit rates tailored for 2G MMS attachments. Re-encoding into H.264 and AAC-LC uses a higher bit rate floor so the conversion does not introduce second-generation compression artifacts.
Does converting 3GP to MP4 change the frame rate?
No. If your original phone clip was captured at 12 fps or 15 fps, or uses variable frame timing, the output MP4 keeps that exact cadence so audio and lip movement stay synchronized.